Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com General Discussion
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-30-2009, 01:21 PM   #1
Junior Member
Join Date: Sep 2009
Posts: 1
Electric Visor Repair

I have a 33 ft. Itasca Suncruiser (2006) and the right, passenger-side visor is stuck midway. How do I repair or remove it? Could it be the switch button? If so, how do I check it?

J.MARZ is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-30-2009, 03:55 PM   #2
Senior Member
Winnebago Owners Club
Join Date: Oct 2003
Location: Solon, Ohio USA
Posts: 424
Send a message via ICQ to W8RLM
Try calling Owner Relations at Winnebago. Have your VIN ready. They have been great at helping with problems like this.

W8RLM - Bob

2006 Winnebago Journey, Model 39K, 2013 Dodge Dart
W8RLM is offline   Reply With Quote
Old 09-30-2009, 04:12 PM   #3
Senior Member
AFChap's Avatar
Winnebago Owners Club
Spartan Chassis
Join Date: Aug 2002
Location: ...hopefully on the road!
Posts: 4,433
I don't know the mfg of your visors, but most have a way to set the upper and lower "stop limits -- normally by pressing a button or two while raising and lowering the shade. Your settings may have become messed up ...my originals were bad about that, slipping in the mount (or totally falling out!) and getting messed up. My originals were "AutoMotion" made in Canada. I replaced them with MCD, and the same principle applies.
Paul (KE5LXU) ...was fulltimin', now parttimin'
'03 Winnebago UA 40e / '05 Honda Odyssey toad
AFChap is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converted manual awning to electric Darryl MH-General Discussions & Problems 14 04-21-2013 07:42 PM
Heat Pump - No Electric Heat Drifterpilot MH-General Discussions & Problems 3 04-11-2009 07:13 PM
Generator not making electric javpop Monaco Owner's Forum 19 12-14-2008 07:04 PM
Electric Fireplace BookIIRoadtrash Excel Owner's Forum 4 12-14-2008 08:06 AM
DOE Announces $30 Million for Plug-in Hybrid Electric Vehicle Projects Hitchhiker Going Green 2 06-22-2008 02:24 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:24 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.