Has anyone redone the entry door?

[vmax1]

On my Dolphin (see pic), the covering on the inside is peeling off and wrinkled bad, want to remove the looks like wall paper finish on it and put something on that will look good, any suggestions on the fix will be helpful, thanks.

[JudyH]

I'm not seeing a pic, but you could check at big box store for wall liner for bath or kitchen, it would be water proof. Or the peal and stick stuff they for back splashes or behind stoves.

[terry735001]

tip .. some thing i think some one well use in a lugly bay

i made a post for bays i dont see your pics so i cant say if this would work for you

[Theberrys]

FRP from the Home Depot.

4 ft. x 8 ft. White .090 FRP Wall Board-MFTF12IXA480009600 at The Home Depot

I used it inside a Pop Up for a wall covering.

Dick

[sswilson]

First you have to find out how it got wet and fix that. I had a bottom portion on my door get wet and bubble/wrinkle. I was able to 97% match the color and pattern at Windsor Plywood. It was virtually the same board that was in there. Fixed the leak at the moulding part way up the exterior wall and cut and installed the new 1/8" patterned ply on the inside. If I didn't tell anyone I put it in, it would not be noticed.

[bjcarpetguy]

If a wood look is desired, At Depot in the plywood section if you look at flooring underlayment. One side is grided but usually the other side is nice looking plywood.
a sheet usually goes for about 11.00.