I carry several pads made from 2x stock sandwiched between 1/2" or 3/4" plywood with a 45degree angle cut on one end and a hole on center on the 45degree edge. The hole servers two purposes. 1. I use it with a hook on a pole to remove the pad from beneath the mh. 2. If the pad slips when I try to drive onto it, I place a knotted rope through the hole, align the pad to the tire and drive over the rope, which secures the pad and allows me to drive onto the pad.
MADP, Jeep, Blue Ox, SMI AFO, Solar 900 watts with 672ah AGM's, Amish cooling unit, Lifetime: SKP & Days End