|
|
12-06-2014, 12:20 PM
|
#1
|
Member
Join Date: Sep 2013
Posts: 33
|
Need a part not mfg anymore.
Good 'ole Attwood really did it to a lot of RV'ers just recently, and most don't even know it! I'll tell it as it happened to us. The right front leveler went nuts and is broke. But so is the control board too. Attwood quit making (I'm sure some PC house is making them for Attwood) the control board P/N 66274 which is for a Diesel Pusher with air ride. But the new board won't work with existing jacks . Real nice of them, huh!
Found a place that MIGHT be able to fix the board. This is where you say ,"There ought to be a law against this stuff!!!!!" Unless your the mfg, then your soooooo happy, think of all the money your going to steal from people, and it's legal!! Anyways, Does anyone know how to look for a board at a RV wrecking yard? Please let me know if you might have a board or know where one is. I'm going to see if I can find RV wrecking yards on the net. Many thanks, Ken and Karen
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
12-06-2014, 03:36 PM
|
#3
|
Senior Member
Join Date: Nov 2011
Location: Polk City Florida
Posts: 1,930
|
Also try the multiple salvage sales shops in Elkart Indiana. They buy up tons of stock from all of the RV manufacturers
__________________
Don and Nancy
[2018 Tiffin Bus 40 AP, 2022 Ford Edge ST , 9yr old sisters Sara n Kaycee, Havanese, Electric Catrike
|
|
|
12-07-2014, 07:21 PM
|
#4
|
Member
Join Date: Dec 2001
Location: Climax,MI
Posts: 92
|
You could also check Bontrager Surplus and Johnson Surplus in White Pigeon, MI.
Sorry I've misplaced the address and phone nos, they're available on line.
Milt
|
|
|
12-07-2014, 08:07 PM
|
#5
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
i know of a you pull it down here in FL that all ways had 30 RVs in nice units but not sure where you are from as you would have to go there as they well not pull it them self
|
|
|
12-07-2014, 09:11 PM
|
#6
|
Senior Member
Join Date: May 2013
Location: Atlanta
Posts: 540
|
You might also try: www.pplmotorhomes.com click on RV parts.
__________________
2014 Palomino Puma 25RS 28 days in 2014, 47 days in 2015, 71 days in 2016, 2017-33, 2018- 29 booked.
2011 F-150 Supercrew 5.0 6spd, Me, Xyl and the 2 Fur kids, BooBoo and Gracie (felines)
|
|
|
12-08-2014, 06:56 AM
|
#7
|
Registered User
Join Date: Mar 2010
Posts: 8,777
|
Quote:
Originally Posted by terry735001
i know of a you pull it down here in FL that all ways had 30 RVs in nice units but not sure where you are from as you would have to go there as they well not pull it them self
|
KenandKaren & terry735001
Personally I would not be comfortable with a used electronic control board, (except to put it in until a new one was found).
|
|
|
12-08-2014, 07:07 AM
|
#8
|
Senior Member
Join Date: Feb 2011
Location: Snowbird - Waterford Mi and Citrus Springs Fl.
Posts: 3,609
|
What makes you so sure the board has an issue? I'd be willing to bet half of the boards that are replaced are done so as a guess that "might" or "should" fix a problem.
Do the rest of the jacks work normally?
__________________
1997 37' HR Endeavor, 275hp Cat, Freightliner
03 CR-V Blue Ox, Ready Brake
|
|
|
12-08-2014, 05:42 PM
|
#9
|
Member
Join Date: Sep 2013
Posts: 33
|
Atwood level legs control bd
Mel, you didn't read the post close enough. Good 'ole Atwood obsoleted the board , I or anyone, can't get a new one. That's why I'm trying to find a used one. I've tried quite a few RV wrecking yards, still no luck so far.
Or, I can do like Atwood wants us to do, buy a whole new system for over 3K $$. Real nice of them. I'd like to ask the President of Atwood why they did this to so many people. Oh well.............
|
|
|
12-08-2014, 05:46 PM
|
#10
|
Member
Join Date: Sep 2013
Posts: 33
|
AHicks, we tested the board numerous ways, with a qualified RV tech and good'ole Atwood on the phone. They confirm its bad. I really wish it wasn't bad, believe me.
Ken
|
|
|
12-08-2014, 06:14 PM
|
#11
|
Senior Member
Outdoors RV Owners Club
Join Date: Oct 2014
Posts: 3,539
|
As a supplier of electronic components and accessories I can assure you that they did not make this change to force you to buy a new system. I recently killed a line of instruments because certain chips and other components of the circuit boards were no longer available. After exhausting every old stock and "removed for repair" board we had laying around we had no choice but to list the units as obsolete. Nothing is changing as rapidly as the electronics world except possibly the medical world, (which we also are a player in), so anything that is 10 years old in design is suspect and subject to obsoletion. Just how it is.
|
|
|
12-08-2014, 08:31 PM
|
#12
|
Registered User
Join Date: Mar 2010
Posts: 8,777
|
Quote:
Originally Posted by KenandKaren
Mel, you didn't read the post close enough. Good 'ole Atwood obsoleted the board , I or anyone, can't get a new one. That's why I'm trying to find a used one. I've tried quite a few RV wrecking yards, still no luck so far.
Or, I can do like Atwood wants us to do, buy a whole new system for over 3K $$. Real nice of them. I'd like to ask the President of Atwood why they did this to so many people. Oh well.............
|
KenandKaren
Just because "Good 'ole Atwood obsoleted the board" does not mean that nobody makes a replacement board.
Most everything about my coach has been obsolete for at least 8 years.. but with a lot of effort, and little ingenuity, I've managed to get everything that broke fixed, (so far).
Methinks you gave up to soon...... keep trying.
Good luck.
Mel
'96 Safari, 134k miles
|
|
|
12-08-2014, 08:41 PM
|
#13
|
Senior Member
Join Date: Feb 2011
Location: Snowbird - Waterford Mi and Citrus Springs Fl.
Posts: 3,609
|
Have you considered getting a second opinion? I don't know you, or who you're working with, but I can tell you with absolute confidence there are a LOT of "qualified RV techs" that aren't as qualified as they would have you believe....
Even those that are more than capable when servicing some things, are completely lost when it comes to others. There's a LOT of country to be covered between the front and rear bumpers of a MH. Darn few are capable of all of it with an equal degree of competency...
__________________
1997 37' HR Endeavor, 275hp Cat, Freightliner
03 CR-V Blue Ox, Ready Brake
|
|
|
12-09-2014, 08:37 AM
|
#14
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,903
|
RV salvage and surplus yards in the U.S. and Canada
Get on the phone and begin inquiring about your PC board.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|