Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com General Discussion
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 03-26-2012, 12:53 PM   #1
Join Date: Mar 2009
Posts: 30
Put Vinyl flooring in RV - question on doghouse area

We got our RV done, had the carpet taken out and replaced with Vinyl flooring - really like it. Question is, there is a small gap now between the doghouse and the floor (I had read about this in other posts I can't find now and how they resolved that problem with Weather Stripping). Can anyone tell me how they did the weather stripping around the doghouse to make it appear flush with the floor (the way it looked with the carpet). Really need quick help as we are due to leave for a trip very soon.
Thanks to anyone, Darlene

Darlene77 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-26-2012, 04:24 PM   #2
Monaco Owners Club
Gulf Streamers Club
Join Date: May 2011
Location: NB, Canada
Posts: 44
Darlene, I have not done it but I think I would get some matching hardwood such as ash or cherry and cut it to the size of the cover and brad it to the floor. You can put a nice edging with a router. If you don't have the tools no doubt there are woodworkers near you who would enjoy the challenge, or perhaps some student taking woodworking at a local high school. The heat from the engine won't harm it and it would look good.
camperme2 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello, RV renter here brandypup New Member Check-In 31 05-29-2012 06:01 AM
National RV, Rear CAT overheats too easily Bonanza45D Caterpillar Engine Forum 57 05-07-2012 03:14 PM
Only in California! Wanabee FTer Just Conversation 56 03-27-2012 05:25 PM
Help with our rv hunt Tim4269 Class A Motorhome Discussions 16 03-27-2012 07:19 AM
Camp grounds in San Antonio Tx? High country Camping Locations, Plans & Trip Reports 16 03-26-2012 12:47 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.