Tag axel has a rubber bushing that has seperated from the front axel causing the motor home to lean to the side about 8 inches. Can the two axel be welded as a alternative to replacement?
Jack
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
First post: "Tag axel has a rubber bushing that has seperated from the front axel causing the motor home to lean to the side about 8 inches. Can the two axel be welded as a alternative to replacement?"
I have the same setup on my R.V. but I have not had trouble with them (just yet).
Only with the breaks to the toon of $2,200.00.
Where are you located at?
What state are you in?
Just a thought.
WOW! Those pictures are ugly.
I believe those rubber blocks are a variation of the example picture I posted before.
I'm still thinking that Mor-Ryde is probably the maker.
Look for an ID band on the tag axle. Then contact Mor-Ryde and see if they can help.
Good luck!
__________________ Nick
1995 Coachmen Santara 360MB 36' w/slide.
Ford F53/460 chassis, 2020 Chev Equinox "toad"
Linear Mode
