|
|
02-16-2013, 06:11 AM
|
#29
|
Community Administrator
Join Date: Aug 2009
Posts: 53,540
|
You may need a 90 degree fitting , I did. Also as I posted in #13 above , you may want to consider a high pressure drinking water safe hose.
Cliff
Quote:
Originally Posted by Jim Estes
I ordered the Valterra from CW...I will pester u guys later on how I am gonna hook it up inside my bay...something tells me I am gonna need another 90 degree fitting
|
__________________
Cliff,Tallulah and Buddy ( 1999-2012 )
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
02-17-2013, 05:56 PM
|
#30
|
Senior Member
Texas Boomers Club Oklahoma Boomers Club
Join Date: Dec 2012
Location: Any where I want it to be
Posts: 941
|
Valterra looks good. Wish I could have held off on buying.
The water pressure is really high here..
__________________
F/T 11/20/2012
|
|
|
03-07-2013, 11:10 AM
|
#31
|
Senior Member
Newmar Owners Club Ford Super Duty Owner
Join Date: Jul 2011
Location: Florence, OR.
Posts: 345
|
I need to get a new water pressure regulator, have been using one of the cheap ones and really need some more flow. I was looking for info on the Valterra but I can't find out what the water flow is(GPM), does anyone know what the flow is rated at? Anyone have any positive feedback for the Valterra?
I was considering the Valterra or the Watts 263a, I know that the Watts 263a is rated @ 4-4.5GPM. Suggestions would be greatly appreciated. Thanks.
__________________
Mike & Lora, 2020 Newmar Baystar 3609, SG2
Ready Brute w/ Ready Brake, Safe-T-Plus, Koni FSD Shocks, CHF, Tiger Rear Trak Bar, 05 GMC Envoy
|
|
|
03-07-2013, 07:18 PM
|
#32
|
Senior Member
Newmar Owners Club Ford Super Duty Owner
Join Date: Jul 2011
Location: Florence, OR.
Posts: 345
|
So I called Valterra customer service and they stated that the GPM output for the Valterra A01-1117VP is 14-15 GPM, this seems very high, so I sent them an email and they sent the same response back to me. This seems too high, is this possible? The watts 263a is only rated @ 4-4.5 GPM, the Watts N55B is only rated @ 6-9 GPM.
__________________
Mike & Lora, 2020 Newmar Baystar 3609, SG2
Ready Brute w/ Ready Brake, Safe-T-Plus, Koni FSD Shocks, CHF, Tiger Rear Trak Bar, 05 GMC Envoy
|
|
|
03-07-2013, 08:31 PM
|
#33
|
Senior Member
Fleetwood Owners Club iRV2 No Limits Club
Join Date: Sep 2012
Location: Rainbow Riding
Posts: 18,574
|
Quote:
Originally Posted by mllk3rd
So I called Valterra customer service and they stated that the GPM output for the Valterra A01-1117VP is 14-15 GPM, this seems very high, so I sent them an email and they sent the same response back to me. This seems too high, is this possible? The watts 263a is only rated @ 4-4.5 GPM, the Watts N55B is only rated @ 6-9 GPM.
|
I happen to have the Valterra in the garage. Just went and looked and nowhere on it are GPM listed. I don't have the packaging and don't remember if it is printed there or not. Not sure why you are concerned about GPM as the plumbing and adjustment are psi measures. The Valterra is adjustable for 16 - 65 psi and is preset to 45 psi. There is a paper tag on the back of it that says check the psi limit for your plumbing. Also on the CW website in the Q&A at the bottom - the GPM is listed as 15.
As for the other poster - yep you will probably need a 90 degree fitting.
Presumably we are referring to this Valterra
__________________
Steve & Annie (RVM2)
2008 Fleetwood Bounder 38F ~ 325 ISB Turbo ~ Freightliner XC 2014 CR-V ~ Invisibrake / Sterling All Terrain
Sioux Falls, SD (FullTime Since Nov 5th 2014)
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|