whirlpool refrigerator door shelf retainer bar

[PaxSkipper]

Hi All,

The retainer bars on my refrigerator (2 door Whirlpool residential) tend to fall off.

I have tried to use silicone to stick them on, but that has not worked well. Does anyone have any suggestions.

Thanks in advance.

[STLNLUV]

We purchased some spring loaded round curtain rods at Walmart and use them everywhere we need a restraint while traveling. Measure your opening(s) and match them up to the size on the label. They are inexpensive and work like a charm.

[PaxSkipper]

We use these for the inside shelves. Not likely to work well on door shelves.

[Dr4Film]

Unfortunately by previously using silicone your options are few if none. I would recommend removing the silicone and also use a Silicone Remover product that I found at Lowe's to remove any residual. Ask any floor assistant where it is located.

Then use a two part clear epoxy like JB-Weld or Devcon to hold the retainer bars in place.

Dr4Film ----- Richard

[PaxSkipper]

Thanks, I guess I was thinking of something less drastic. But so far my efforts have not worked. I guess I'll try that the next time we turn it off. 😳