Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com General Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-03-2009, 10:32 PM   #1
Junior Member
 
Join Date: Aug 2009
Posts: 1
Window Vinyl Insert

Is there a trick to installing the vinyl insert around the corner radii of the windows? I am using new insert material and it fits the track correctly for the straight runs, but when I get 3/4 arounf the radius it pops out. Do I need to use a hiar dryer and heat up the insert?

I appreciate anyone's help with this.
__________________

__________________
gmccabejr is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-03-2009, 11:56 PM   #2
Senior Member
 
justimagination's Avatar
 
Fleetwood Owners Club
Ford Super Duty Owner
Join Date: Apr 2008
Location: Monroe, Ga USA
Posts: 708
There is a special tool for installing the moulding. The mid 80's Chevy Trucks used a similar moulding. Check with your local glass co's, or even better find the nearest Tool truck, such as Snap-on , or Matco , they sell this tool. Try not to use any Silicone, as it will make it slick and as easy to pop out as installing it. Hope this helps. Good luck,
David G.
__________________
_____________________________________________
USAF 1959-1963/ JFK Innaguration parade 1961,
1997 Fleetwood Southwind 37Y, 460 ENGINE on FORD chassis, Power Platform with Tag Axle.
justimagination is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exterior Vinyl Window Trim ChiefJohn Excel Owner's Forum 19 08-08-2008 02:29 PM
Window Replacement Gadget Man Class A Motorhome Discussions 3 07-22-2008 08:08 PM
Vinyl trim insert Man in Blue Newmar Owner's Forum 5 07-13-2008 09:31 AM
Question about replacing exterior vinyl insert abarkl MH-General Discussions & Problems 2 06-25-2005 01:52 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:09 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.