RV Trip Planning Discussions

Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com General Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-02-2019, 08:36 AM   #1
Junior Member
 
Join Date: Jul 2019
Posts: 2
Workhorse Chassis P32 Auto Park Brake Problem 2003 Winnebago Sightseer

Started having a problem with the Auto Park Brake not engaging when putting the transmission in park and/or pulling out the yellow switch. If the motor home has not been running the system works normally as it should. After the motor home runs for a while the brake does not engage when put in park, but after it sets from running for a few minutes with the shift lever in park it will apply itself. Has anyone had a similar problem or any suggestions of what may be the problem? Thanks.
Modify message
__________________

Gil Penney is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-02-2019, 10:55 AM   #2
Senior Member
 
George Schweikle's Avatar
 
Join Date: Apr 2004
Posts: 2,608
Welcome Gil. You will get additional replies to your post, but here's a link to the acknowledged absolute autopark expert: AutoPark parking brake system help, troubleshooting, and repair

He is VERY helpful, but hearing impaired and likes to communicate by email.

Quote:
Originally Posted by Gil Penney View Post
Started having a problem with the Auto Park Brake not engaging when putting the transmission in park and/or pulling out the yellow switch. If the motor home has not been running the system works normally as it should. After the motor home runs for a while the brake does not engage when put in park, but after it sets from running for a few minutes with the shift lever in park it will apply itself. Has anyone had a similar problem or any suggestions of what may be the problem? Thanks.
Modify message
__________________

__________________
George Schweikle Lexington, KY
1999 Safari TREK 2830, FMCA 190830, Safari International chapter
1995 Safari TREK 2630, 1983 Winnebago Chieftain, 1976 Midas Mini
George Schweikle is offline   Reply With Quote
Old 07-02-2019, 12:49 PM   #3
Senior Member/RVM #90
 
MSHappyCampers's Avatar


 
Monaco Owners Club
Join Date: Nov 2002
Location: Columbus, MS
Posts: 39,851
Hi ! Welcome to IRV2! We're sure glad you joined the gang!

Don't know about that but wanted to say hello! Have fun and keep her between the ditches!

Good luck, happy trails, and God bless!
__________________
Joe & Annette

2002 Monaco Windsor 40PBT, 2013 Honda CRV AWD
MSHappyCampers is online now   Reply With Quote
Old 07-02-2019, 01:50 PM   #4
Senior Member
 
Join Date: Jul 2015
Location: Watertown NY USA
Posts: 2,929
Send a member on here who as he says is "The resident Expert on Auto-Park" an E-Mail asking him for his help. He is also known as "Old Used Bear".
Roger's E-Mail is: rhaag11@charter.net
Lynn
__________________
2002 Fleetwood Storm 30H on Workhorse P32 chassis 8.1 gas.
LETMGROW is offline   Reply With Quote
Old 07-10-2019, 09:58 AM   #5
Junior Member
 
Join Date: Jul 2019
Posts: 2
I have replaced the solenoid valve and that seems to have solved the problem
Gil Penney is offline   Reply With Quote
Reply

Tags
brake, chassis, p32, problem, sightseer, winnebago, workhorse, workhorse chassis



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OBD 2 connector port location on a 2003 HR Workhorse P32 chassis Scorpion65 Workhorse and Chevrolet Chassis Motorhome Forum 4 08-02-2017 05:05 AM
Workhorse P32 Chassis auto parking brake jazzerjump Winnebago Industries Owner's Forum 0 12-12-2013 06:22 PM
04 P32 workhorse Auto-park no release bb86 MH-General Discussions & Problems 7 10-11-2008 03:49 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:28 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×