Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com International Rally
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 02-05-2007, 04:45 PM   #1
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
Do to scheduling conflicts Mike Bronzini and Steve Brazel will NOT make the National IRV2 Rally in Branson. Mike has asked me to fill in for him and Steve. Mighty big set of shoes to fill, I hope I am up to the task.

I will be doing the programming at the rally. Normally Steve would would do both the upgrade or update in one setting. The UltraPower UPGRADE will be done a bit differently as I will have to read/save the ECM, transmit it to Brazel's, receive it back and write the update to the ECM. Remember, the ECM update is customized to each module based on the Vin # and the calibration codes set by GM for that Vin #. If you want to see the GM code numbers check this link GM Vin# Codes. Note-You must use IE to access this site.

If you need the UltraPower UPDATE the procedure will be the same... except Brazels will just update the various tables and send it back.

Although this is kinda early I am starting a list of who wants what. I will have as many of Brazels products available as I can. But, I will not be able to any installs during the rally do to time constraints....

UltraPower
ECM Upgrade - $650 - 1st Time
1.Rick Taube - 2003 Southwind 36t
2.
3.

ECM Update - FREE - Previously Installed
1.Roger Moore - Newmar--03 KS-3740
2.Ted Trostle - 04 Winnebago Sightseer, 35N
3.
__________________

__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-05-2007, 04:45 PM   #2
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
Do to scheduling conflicts Mike Bronzini and Steve Brazel will NOT make the National IRV2 Rally in Branson. Mike has asked me to fill in for him and Steve. Mighty big set of shoes to fill, I hope I am up to the task.

I will be doing the programming at the rally. Normally Steve would would do both the upgrade or update in one setting. The UltraPower UPGRADE will be done a bit differently as I will have to read/save the ECM, transmit it to Brazel's, receive it back and write the update to the ECM. Remember, the ECM update is customized to each module based on the Vin # and the calibration codes set by GM for that Vin #. If you want to see the GM code numbers check this link GM Vin# Codes. Note-You must use IE to access this site.

If you need the UltraPower UPDATE the procedure will be the same... except Brazels will just update the various tables and send it back.

Although this is kinda early I am starting a list of who wants what. I will have as many of Brazels products available as I can. But, I will not be able to any installs during the rally do to time constraints....

UltraPower
ECM Upgrade - $650 - 1st Time
1.Rick Taube - 2003 Southwind 36t
2.
3.

ECM Update - FREE - Previously Installed
1.Roger Moore - Newmar--03 KS-3740
2.Ted Trostle - 04 Winnebago Sightseer, 35N
3.
__________________

__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 02-06-2007, 06:24 AM   #3
Member
 
rad1945's Avatar
 
Monaco Owners Club
Texas Boomers Club
Join Date: May 2006
Location: Where the wheels stop
Posts: 93
Dale,
Please add our MH for the ECM upgrade.
Thanks, Rick
__________________
Rick & Brenda
2006 HR Neptune 36PDQ
http://thewanderingdoves.blogspot.com
rad1945 is offline   Reply With Quote
Old 02-06-2007, 10:20 PM   #4
Member
 
Join Date: Jul 2005
Location: Mechanicsville Virginia
Posts: 71
Dale, Will you be able to do my ultraPower at Branson? Your notice is confusing to me.

Lynn Sims
2002 Winney Adventurer, gas
__________________
Woof is offline   Reply With Quote
Old 02-07-2007, 07:20 AM   #5
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
Yes Lynn I will be doing doing the UltraPower upgrade (never had it done) or update (currently have it installed).
__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 02-09-2007, 09:00 AM   #6
JC2
Senior Member
 
JC2's Avatar
 
Newmar Owners Club
Texas Boomers Club
Join Date: Dec 2003
Location: Mo/Texas
Posts: 3,156
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by oemtech:
Do to scheduling conflicts Mike Bronzini and Steve Brazel will NOT make the National IRV2 Rally in Branson. Mike has asked me to fill in for him and Steve. Mighty big set of shoes to fill, I hope I am up to the task.

I will be doing the programming at the rally. Normally Steve would would do both the upgrade or update in one setting. The UltraPower UPGRADE will be done a bit differently as I will have to read/save the ECM, transmit it to Brazel's, receive it back and write the update to the ECM. Remember, the ECM update is customized to each module based on the Vin # and the calibration codes set by GM for that Vin #. If you want to see the GM code numbers check this link GM Vin# Codes. Note-You must use IE to access this site.

If you need the UltraPower UPDATE the procedure will be the same... except Brazels will just update the various tables and send it back.

Although this is kinda early I am starting a list of who wants what. I will have as many of Brazels products available as I can. But, I will not be able to any installs during the rally do to time constraints....

UltraPower
ECM Upgrade
1.Rick Taube - 2003 Southwind 36t
2.Lynn Sims - 2002 Winney Adventurer
3.

ECM Update
1.
2.

UltraPower CAI
1.
2.

UltraTrac Trac Bars
Workhorse - Rear
1.
2.

Workhorse - Front
1.
2.

Taylor Plug Wires
1.
2.

AC 41-932 Spark Plugs
1.
2.

Koni FSD Shocks
1.
2. </div></BLOCKQUOTE>

Is the upgrade for 1st timers and the update for those that have had it done in the past??
What is the cost?
__________________
04 Newmar DSDP 4015-Cummins ISL 370hp-Spartan MM Chassis-2013 Chev Equinox AWD-Ready Brute Elite Towing System-FMCA 402879-SKP 120487
JC2 is offline   Reply With Quote
Old 02-09-2007, 09:13 AM   #7
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
This is both... The Rally price is $650 with a Liftime warranty.
__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 02-09-2007, 10:49 AM   #8
Community Moderator
 
"007"'s Avatar


 
Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 26,804
Dale I thought updates were part of the original install no charge as long as original owner.
__________________
98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans, now in good hands
VISIT the NEWMAR QUICK TIPS & EASYMODS 1 & 2
QUICK TIPS # 3
RV SYSTEMS & APPLIANCES & RECALLS --- TECH INFORMATION
"007" is offline   Reply With Quote
Old 02-09-2007, 01:24 PM   #9
Senior Member
Official iRV2 Sponsor
 
Join Date: Jul 2005
Location: CENTRALIA, WA
Posts: 1,360
Roger,

He is talking about new customers,the UltraPower updates are still free.
__________________
Chris Leach
Brazel's RV Performance
Brazels RV Performance is offline   Reply With Quote
Old 02-09-2007, 03:21 PM   #10
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">UltraPower
ECM Upgrade - $650 - 1st Time

ECM Update - FREE - Previously Installed </div></BLOCKQUOTE>

Roger,

The difference is UPGRADE versus UPDATE. You would be on the Update list if you need/want it.
__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 02-10-2007, 02:37 PM   #11
Community Moderator
 
"007"'s Avatar


 
Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 26,804
Add me to update list. Does anyone have what the update is? Is it more than the ping issue?
Thanks oh great one with the POWER.
__________________
98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans, now in good hands
VISIT the NEWMAR QUICK TIPS & EASYMODS 1 & 2
QUICK TIPS # 3
RV SYSTEMS & APPLIANCES & RECALLS --- TECH INFORMATION
"007" is offline   Reply With Quote
Old 02-11-2007, 04:38 PM   #12
Senior Member
 
FLYTYER's Avatar
 
Mid Atlantic Campers
Workhorse Chassis Owner
Join Date: Jul 2000
Posts: 1,611
Dale I will need the free Update.

Let me know what I need to provide.
__________________
04 Winnebago Sightseer, 35N, W22 Chassis
Amateur Radio - WB2LOU
Education is the only legal cure for Ignorance. The Stupidity of many is incurable.
FLYTYER is offline   Reply With Quote
Old 02-12-2007, 08:00 AM   #13
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,243
Send a message via AIM to Oemtech
Don't anything for the update...
__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 02-12-2007, 04:18 PM   #14
Senior Member
 
Jestme13's Avatar
 
Mid Atlantic Campers
Join Date: Feb 2006
Location: McVeytown, PA
Posts: 2,254
Hoemytech, I have decided to attend the Rally and assist you in your duties. Someone needs to guide our older folks. I will assist in pushing you under and pulling you out from under the buses.
__________________

__________________
Steve, Pat, Hakbar, & Root Motor

2007 National RV Pacifica 36'
Jestme13 is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ultrapower upgrade agiledog Workhorse and Chevrolet Chassis Motorhome Forum 8 08-26-2007 10:05 AM
UltraPower Upgrade Redo??? JC2 Workhorse and Chevrolet Chassis Motorhome Forum 14 08-04-2007 06:17 AM
Anyone regret Ultrapower Upgrade? rotts4u Workhorse and Chevrolet Chassis Motorhome Forum 58 02-13-2007 06:38 AM
Pinging After Ultrapower Upgrade FLYTYER Workhorse and Chevrolet Chassis Motorhome Forum 77 12-01-2006 12:34 PM
Ultrapower upgrade update cartex1 Ford Motorhome Chassis Forum 14 07-30-2006 03:56 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 06:19 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.