New member from Austraila

Down under · 07-17-2011, 12:35 AM

Hi All,
Last month my wife and I became the 3rd owners of an Australian built 2004 Winnebago Explorer 33,000 miles.

Previous owner was not mechanically minded and efforts to learn more about Workhorse Custom Chassis in this country result in people thinking I wish to harness up a horse and do some plowing!!

My inital desire is to decode the VIN number 5B4LP57F443384178, to hopefully learn more and hopefully obtain a service manual to suit!!
Known details are as follows: Powered by 6.5ltr V8 trubo diesel, WCC model # P300 32, 208inch wheelbase, 4 speed column shift auto (think hydra-matic).
Lastly, was there any re-calls applicable to this VIN that I should check out??
Thanks in advance.

**Petro** · 07-17-2011, 10:16 AM

Welcome to iRV2.

We are glad you joined us. Sorry, I have to admit I can't answer one of your questions. I would suggest you post your questions in the Workhorse Forum HERE. I believe you should receive more replies there. Post often and share with us how this works out for you.

Don

MSHappyCampers · 07-17-2011, 06:49 PM

Can't help on the RV but we're sure glad you joined us

Down under · 07-25-2011, 04:58 AM

Quote:

Originally Posted by Petro

Welcome to iRV2.

We are glad you joined us. Sorry, I have to admit I can't answer one of your questions. I would suggest you post your questions in the Workhorse Forum HERE. I believe you should receive more replies there. Post often and share with us how this works out for you.

Don

Thank you Petro will give Workhorse Forum a try. Down under