W24 Trans oil cooler leak

[FISHERMARTIN]

Hi, I was hoping to get some help on an oil leak coming from the transmission oil cooler line fitting at the radiator. I have an 07 Workhorse 8.1 with an Alllison 2100. At the radiator fitting for the upper transmission oil cooler line I have an oil leak. It does not have the jiffy tight fitting with the external clip to release the cooler line. I called Workhorse and 3 Workhorse repair centers. All have different infomation the fitting has been discontinued and no replacement at this time. W8005379 is the part number for the fitting at the radiator. Does any one know if the fitting can be removed without disturbing the the cooler inside the radiator and can the O rings be replaced and what tool is used to disconnect the line from the fitting. Thanks for any help you can provide

[bsirby]

Glad to have you join this forum. This is a very friendly and helpful bunch of people here. Not everyone looks at the new member thread so you might have better luck posting your question under MH general discussion and problems or Workhorse further on down the page. Good luck

[Petro]

FISHERMARTIN;

Welcome to iRV2. We are glad you joined us. I also would recommend you post your question in the Workhorse Forum. There are some very knowledgeable members there that should be able to advise you.

Good Luck;
Don