|
10-01-2014, 08:00 PM
|
#1
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: May 2012
Location: Today? Clayton, North Carolina
Posts: 5,093
|
Forum Tech Question... (I'll try here first.)
A question for any computer savvy or forum savvy folks: (I suppose there's a forum tech support page, but I couldn't find it.)
On my computer, here in the Newmar Owner's section, the thread titled "Newmar Hoots Looking for a Roost" does not wrap. It displays in the window as extremely wide, and I have to use the horizontal slide bar to view the full scope of the text in each post. The other threads in this section, and all threads I have checked in every other section of iRV2 (a total of "lots"), all wrap properly such that I can see and read the entire post without shifting the window.
Has anyone encountered this sort of thing before? Is this a config item on MY comp? Why would only one particular thread be subject to this?
Thanks for your help. I am at a loss! I could fly 400 tons across oceans, but a few odd electrons have me in turmoil!
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-01-2014, 08:10 PM
|
#2
|
Senior Member
Join Date: May 2014
Posts: 3,059
|
Mine does the same thing on some of the bigger threads for some reason, I thought I was doing something wrong, or my computer was messed up. I'm like you when the computer won't do what I want it to, my kids have to show me how to do it. It will be interesting to see what the amswer is here, because it is only on a few threads.
__________________
Mike & Charlotte
2014 Newmar Canyon Star 3610
Orange County, California
|
|
|
10-01-2014, 08:29 PM
|
#3
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
Can you post a post number in that thread where you have seen this?
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
10-01-2014, 08:37 PM
|
#4
|
Senior Member
Newmar Owners Club Solo Rvers Club
Join Date: Feb 2014
Location: The Constitution State
Posts: 4,584
|
I've seen that on many threads where a picture with the "click this bar" on it is expanded and winds up being much wider than your browser window.
I couldn't find anything in the thread noted but in the Lookin' Out the Windshield thread in the general discussion forum, it's really easy to make it happen - first picture on page 2, expand it and you'll see that effect.
Can't say for certain if that's what you're encountering, but I have noticed this in the past.
|
|
|
10-01-2014, 08:42 PM
|
#5
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
I'll take a peek there.
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
10-01-2014, 08:51 PM
|
#6
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
I could not see anything wrong on page two but made one change could you check it out for me and let me know how it looks now.
http://www.irv2.com/forums/f59/looki...ml#post2131365
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
10-01-2014, 09:13 PM
|
#7
|
Senior Member
Newmar Owners Club Solo Rvers Club
Join Date: Feb 2014
Location: The Constitution State
Posts: 4,584
|
I didn't notice any difference. Here's two screen shots - one prior to clicking the bar and the second after clicking the bar. Notice the large horizontal scroll bar I wind up with. I believe this is what JFXG is discussing.
|
|
|
10-01-2014, 09:26 PM
|
#8
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: May 2012
Location: Today? Clayton, North Carolina
Posts: 5,093
|
JohnRR.... I checked the "Lookin out the Windshield" thread, and when first opened it also appeared to show the unwrapped pages, but after a few seconds the page jumped all three pages now appear properly wrapped.
The "Newmar Hoots Looking for a Roost" thread that I referenced above, on closer inspection, appears to have the "not wrapping" problem only on pages 11 and 12. Pages 1 through 10 of the thread appear normally. Page 11 appears unwrapped but only slightly wider than my window. Page 12 appears unwrapped and extremely wide.
I would add that this problem appears always, not just when expanding pictures.
Thank you for the assistance!
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|
|
|
10-01-2014, 09:37 PM
|
#9
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
I could be mistaken but it looks normal until you click the enlarge then it goes oversize this would be because of the original size of the picture posted using the in the advance reply box this would be normal as there seems to be no size restriction when posting pictures with this box.
I take really large pictures and this is how they have posted, there have been instances where pictures have been posted side by side with no space between them where they make the whole thread read wide as well as when some links that are super duper long that make the page very wide. In these cases they made every post on that page of the post just as wide where you have to scroll side to side to read.
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
10-01-2014, 10:07 PM
|
#10
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
I got it John I just looked through all the pages and did not see any that were expanded so I guess it's time to look where someone may know what's happening, I know enough to get us all in trouble.
I'm going to move this to Forum issues.
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
10-01-2014, 10:13 PM
|
#11
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: May 2012
Location: Today? Clayton, North Carolina
Posts: 5,093
|
Thanks for the help!
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|
|
|
10-02-2014, 08:51 PM
|
#12
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
Who ever place the pictures in the post placed them straight across the post instead of placing three than step down and place another three and so forth.
I was going to correct but the posts moved on the next pages, everything was back to normal and was not sure I could move links with out mixing them all up.
You can place three pictures side by side than move down and add three more with out extending page over sized.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|