Originally Posted by Eastcoast
We have a sunstar lx 2017, and Maxx air vent from old tt. Will not fit new MH Fantastic vents. Can someone recommend fix or what type vent cover we need the vents have about a 1" stubs on roof on both sides of fans 4 total these stubs are covered in roof caulking
You need to dig into the caulking on the roof of the TT and remove the four pins. They are secured to the roof with screws and then covered with Dicor Self Leveling Sealant.
Put the screws back in place and then go to the new rig and remove the four screws that line up with the four holes on the Max Air Vent. Install the pins using the screws you just removed.
Now put a dab of Dicor on each screw to make sure it is sealed. Set the vent onto the pins and put the retainer clips on each pin to hold the vent in place.
Then set the vent in place and hit the road....
These vents pretty much all mount in the same manner.
Dennis & Carol
2003, 4006, 41' DutchStar,
Spartan, ISC 8.3L W/BanksPower - 2013 Honda CRV, BlueOx Baseplate, Aventa Bar & Patriot Brake. And the 04 Bird, Sunshine Car.