Onan 32 code

[doug las fir]

Need help with onan 5500, tries to start but then starter cuts out. Did all the stuff for the 32 code and no help. I attached a video.. Thanks for any advice.

[okcnewbie]

If the starter won't engage long enough to start I would try to jump start the gen or at least make sure the battery is fully charged.

If you don't have the service manual you might be able to find it here;
Index of /~n0nas/manuals/onan

[MSHappyCampers]

Hi ! Welcome to IRV2! We're sure glad you joined the gang!

Have fun and keep her between the ditches!

Good luck, happy trails, and God bless!

[99-Am.Star]

all I get is the sound of the cranking engine and the words your ad will close in (countdown timer)seconds timer.

[doug las fir]

I will try to load the video again. It plays for me at home

[doug las fir]

try this one.

[doug las fir]

The video plays for me, is there anybody out there that can see this? If not, could someone let me know how to load it maybe in a different format. Thanks

[bruceisla]

Originally Posted by doug las fir

The video plays for me, is there anybody out there that can see this? If not, could someone let me know how to load it maybe in a different format. Thanks

Works for me once I "allow Flash" in Firefox.

[doug las fir]

My Gen set, when trying to start it , it cranks fine (new batteries) starts to smoke a little and then the start cuts out while I'm still holding the start button. On the control board 300-5374 I Found diode P1-10 with 0.00 vdc and it should be .4vdc-.7vdc So I borrowed my buddies control board and the gen set continues to run with the start switch held down but then dies when you let up on the start switch. Thought the other control board would fix it, just a little different starting Any help is much appreciated.

[hohenwald48]

I've known a lot of 32 code issues to be resolved with a new fuel pump and/or filter. They're not expensive and can be found on Amazon.