Anyone have electrical diagrams for the annunciator control panel? Mine just blinks when any switch is pushed? (one blink, then nothing) After a few minutes, it will do the same thing again.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Your 12vdc supply to your panel is probably failing. A poor connection would allow some current to flow and charge the caps on the board. Pushing a button would allow some LED activity untill the cap discharged.
An easy way to troubleshoot this is check both +&- supply connections at the monitor. Using a test light and available known voltage (like a nearby light) reference to the monitor supply points.
Your 12vdc supply to your panel is probably failing. A poor connection would allow some current to flow and charge the caps on the board. Pushing a button would allow some LED activity untill the cap discharged.
An easy way to troubleshoot this is check both +&- supply connections at the monitor. Using a test light and available known voltage (like a nearby light) reference to the monitor supply points.
Thanks. I am working on getting that done. My panel is mounted on the dash board, thus is 'stand on your head' for access. It strikes me that it could be a failing ground as well as the power? There are two plug-ins to the board, each with several wires attached, thus a diagram would help to identify the power supply.