Originally Posted by homeless
I have a demotions 100 watt inverter I want to take out! It has four battery looking wires to it and one 110 wire that plugs into an outlet. If I simply cut the four wires and wire nut them there would be no problems?? I assume if I put a volt meter on them I would find a positive and ground I can put a litter plug on for my new inverter?????
Just looked at mine. Large red wire 12 volt positive
Large white battery ground
Small purple not sure but is a control line
Black cord is AC input
Electrical output socket for two plug in's
You can make sure you have all power disconnected then you can cut each wire starting with the 12 volt lines then tape them so they do not
short to each other or something else.
The 12 volt leads can be used to power your new inverter they are 10