Found the problem with the new Norcold not operating on propane today. The piezo lighter was not grounded as the bracket and screw are heavily covered in black paint. Also had to remove it and bend the tip so it was over the burner rather than on the side of the burner tube. I will run a ground wire from the lighter mounting screw to the grounds that come out of the control box. I am going to leave the paint alone so the bracket won't corrode.
I watched the video on the ARP and will buy one and install it also. Probably the one with 2 fans to help out in our Arizona heat.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!