Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > Vintage RV's
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Thread Tools Search this Thread Display Modes
Old 09-05-2012, 08:20 AM   #1
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Jul 2012
Posts: 68
Rewording of ECM test connector question

I asked earlier where the connector is on a p-30 chassis 1993 vintage. Having gotten no response so let me ask--Does the unit have one? You are supposed to be able to withdraw trouble codes by connecting 2 of the terminals and the check engine light flashes out the code.

KAttkisson is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-05-2012, 08:23 AM   #2
Senior Member
Join Date: Sep 2007
Location: texas
Posts: 2,287
Not sure on your Rv but on cars in that area yes

whem2fish is offline   Reply With Quote
Old 09-05-2012, 02:42 PM   #3
Senior Member
mrv8outboard's Avatar
Tiffin Owners Club
Join Date: Jul 2011
Location: Cape Cod
Posts: 325
OBDi port could be close to the steering column on a GM and under the hood on a Ford.
mrv8outboard is offline   Reply With Quote
Old 09-06-2012, 07:41 AM   #4
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Jul 2012
Posts: 68

Using the information provided by you and an inquiry to Winnebago I found the ECM Test connector screwed to the steering column support up under the dash. To do this required a couple of mirrors and a LED light on a flex stick. It was totally unaccessable for use in its location so I had to unscrew the one screw I could get to and turn it 90 degrees. Could not use the paper clip trick to connect two terminals so borrowed a device ready made to do the same thing from an old timer mechanic. Found out that my check engine light had been coming on due to a lean fuel condition, which I am attuributing to the timing being way advanced when I bought the machine. (Which by the way remember to use #5 plug to time to when using the bottom timing indicator)Thanks again for your responses.
KAttkisson is offline   Reply With Quote
Old 09-07-2012, 07:13 AM   #5
Senior Member
monkey's Avatar
Join Date: Sep 2011
Location: Arkansas
Posts: 2,390
KAt, there is a good P30 group on yahoo that gives us with those older chassis alot of good info... You might check it out for future reference.... Darel
Monkey, pilot of a Great Dane hauler,
2015 Silverado 2500 Duramax/Alison 4x4 CrewCab 2016 Cougar 28SGS
monkey is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 09:31 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.