|
11-23-2005, 10:54 AM
|
#1
|
Junior Member
Join Date: Nov 2005
Posts: 12
|
Hi, I read that you can use epoxy paint to redo a range top. How does that hold up to heat. I have a chrome one that has seen better days and I dying to paint it. But I thought I would have to go with automotive painting. I painted the hood with almond epoxy and it turned out great! I'd love to do the rest.
Karen
__________________
Where are we going? And WHY am I in this handbasket?
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
11-23-2005, 10:54 AM
|
#2
|
Junior Member
Join Date: Nov 2005
Posts: 12
|
Hi, I read that you can use epoxy paint to redo a range top. How does that hold up to heat. I have a chrome one that has seen better days and I dying to paint it. But I thought I would have to go with automotive painting. I painted the hood with almond epoxy and it turned out great! I'd love to do the rest.
Karen
__________________
Where are we going? And WHY am I in this handbasket?
|
|
|
11-23-2005, 11:31 AM
|
#3
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
Check with your local apliance store or Home Depot for their appliance paint which is heat resistant.
We painted an electric cook top several years back and never had a problem. You have to make sure that the surface is absolutely clean. Be sure to do this outdoors as the fumes are pretty strong.
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
11-23-2005, 12:43 PM
|
#4
|
Junior Member
Join Date: Nov 2005
Posts: 12
|
Hi Ken,
Did you paint yours with epoxy paint? I want to do it in Almond and I don't believe high temperature paint has much of a color selection.I think it can also come off if it comes in contact with certain chemicals. Acetone being one. Although I don't know why I would have acetone near it. There are probably other chemicals that could cause a problem too.
Karen
__________________
Where are we going? And WHY am I in this handbasket?
|
|
|
11-23-2005, 02:30 PM
|
#5
|
Moderator Emeritus
Ford Super Duty Owner
Join Date: Aug 2000
Location: Bryan, TX when not traveling.
Posts: 22,948
|
The paint was specifically marked as appliance and it was an epoxy. Smelled like the dickens and it was not cheap.
We put it on a stove top and a vent hood in a rent house we had. 6 years later, we sold it and stove top still top still looked OK. I believe it was almond color as well.
Ken
__________________
Amateur Radio Operator (KE5DFR)|No Longer Full-Time! - 2023 Cougar 22MLS toted by 2022 F150, 3.5L EcoBoost Tow Max FX4 Lariat Travel with one Standard Schnauzer and one small Timneh African Gray Parrot, retired mechanical engineer
|
|
|
11-23-2005, 03:34 PM
|
#6
|
Junior Member
Join Date: Nov 2005
Posts: 12
|
Hmmm.... I think i will just have to try that. It certainly can't look worse than it does. And it might just turn out to be terrific. Thanks loads.
Karen
__________________
Where are we going? And WHY am I in this handbasket?
|
|
|
11-24-2005, 08:21 AM
|
#7
|
Senior Member
Vintage RV Owners Club Ford Super Duty Owner
Join Date: May 2001
Location: Klamath Falls, Oregon (The right side of the Cascades and home of Crater Lake)
Posts: 857
|
The Iceman is right,as he usually is .I did a range in an old Jayco I bought and it looked like new when finished. I removed the top and did it outside. It must be clean. If there is a grease build up try engine degreaser.
__________________
Klamath Falls, Oregon:The Right Side Of The Cascades!
1990 Rexhall Airex 29I,Ford 460cid,Gear Vendor,Granning Tag Axel
'87 GMC Suburban 2500 W/454 CID
|
|
|
11-24-2005, 04:40 PM
|
#8
|
Member
Join Date: May 2005
Location: College Station & Lake Somerville
Posts: 66
|
My chrome stove top started looking yucky, too. I did it with white Epoxy paint, but it didn't hold up for very long under the grates, where it gets very hot. Then I went to white High Heat paint, couldn't get it in Gloss then, but it does hold up. Now I have found some that is Gloss, so I am going to do it again.
__________________
Rving, and fixing them since 1968
Don't Drink and Drive, EVER!!
|
|
|
11-25-2005, 01:36 AM
|
#9
|
Junior Member
Join Date: Nov 2005
Posts: 12
|
I am gonna look for the white high temp paint and paint it under the grates and then use almond on the rest of the stove. Unfortunatelyy after painting the range hood almond I am kind of stuck with that color. Maybe it won't be too
noticeable.What do you think? and thanks for your help.
Karen
__________________
Where are we going? And WHY am I in this handbasket?
|
|
|
11-27-2005, 05:40 AM
|
#10
|
Member
Join Date: May 2005
Location: College Station & Lake Somerville
Posts: 66
|
Maybe you can call around, and find some almond high heat paint. Finding it in gloss is the hard part.
__________________
Rving, and fixing them since 1968
Don't Drink and Drive, EVER!!
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|