Community Forums

guardrail53 · 10-08-2015, 10:28 PM

Cool, Terry! Don't forget to take the driveshaft out before you move it?

Hahahaha!

Rail!

Harley1994 · 10-09-2015, 06:53 AM

Good morning, Rail, we're going to drive the Tot'r to the shop then we'll take the shaft out

. Raining here today, so nothing going to get done outside

.Oh well time for more coffee.

Franka548 · 10-09-2015, 07:02 AM

Rail,
That's funny, but oh so correct.
Terry,
Hope that you get the Toter in the shop and ready to work today. Sounds like you got help lined up(which is a good thing)
Popeye,
Sounds like you will have a fun project, haha

Frank

Harley1994 · 10-09-2015, 07:33 AM

Frank, yup, so far I have help, we are driving it in this afternoon so we can get setup for Sunday, if all goes well we should be done by Sunday afternoon, (IF being the operative word).

spritz · 10-09-2015, 08:47 AM

I missed the bone yard all I get is voice??

Harley1994 · 10-09-2015, 08:51 AM

Hi Tim, not sure what's up with that, I get it all, not sure on others, can you get the other videos?

spritz · 10-09-2015, 09:43 AM

nope post 3459 either, I get voice and if I point my mouse at the line it shows for that second.?
tim

Harley1994 · 10-09-2015, 10:00 AM

I'm not sure what could be wrong, maybe someone that's more computer savvy can jump in. All my computers recognize me so I can see it and hear it, if somebody else is having a problem, I'm not sure.

Franka548 · 10-09-2015, 07:11 PM

Terry,
Hope that you got the Tot'r in the shop this afternoon. It is even quieter than the one in Haurpersville. Very quiet and the owners are great people.
Frank

rvpopeye · 10-09-2015, 08:04 PM

The $200 did not include rotors ,drums ,pads , shoes, spring kits ,,,, hope I can reuse them if not too worn/ rusted. Might still get the spring kits anyway .

I don't think it will be too hard a job ,,,, especially if I can get somebody else to do it ....I AM retired after all.

HEY,,,,,Terry is getting help!

Harley1994 · 10-10-2015, 05:34 AM

Good Morning, Frank, yup drove the Tot'r over to the shop last night, all set for Sunday

. Nice with a quiet campground. Popeye, I always replace the springs and hardware inside the drums those parts go thru alot of stress with heat, and being under tension all the time, cheap insurance. I agree get somebody else if you can and just supervise

, My problem has always been getting someone to do it my way, (doesn't mean I'm always right, just set in my ways).

Franka548 · 10-10-2015, 08:30 AM

Terry,
Glad that you are all set for tomorrow. I agree with you about hard to find someone to do it the way you want. Find it is easier just to do it myself.
Popeye,
I agree with Terry on the replacing the springs and hardware, I have found broken springs, adjusters, etc. after pulling the drums many times over the years. Cheap insurance.
Frank

rvpopeye · 10-10-2015, 01:08 PM

Thanks guys, I've always replaced them too , picked up the parts this morning , $8 more for the spring kit , done. Easy part is done , now the fun begins.

Franka548 · 10-11-2015, 06:25 AM

Terry,
Good luck on the trany change today, and stay safe. Hope that your help does the heavy stuff and all you have to do is supervise.
Popeye,
Too bad that you are not closer to me, I would be happy to help you out, I never minded doing brakes. Are you doing them on Mom's car or the MH?
Frank