Total Rebuild

[Gordon Dewald]

Originally Posted by guardrail53

Terry, sorry I haven't been on much! With two women in my life now, crap, no time for meeeeeeeeeee!

Sorry about your luck. I don't see a downside. Did not see a picture of a beer fridge though.

[Harley1994]

Good Afternoon, Rail, I can see you would really suffer, LOL

[Franka548]

Gordon,
He has no beer fridge,but has an under the counter coffee pot that works great.
Plus that grin from ear to ear that he has had since he got here should say it all.
Terry,
Finally got the front compartment cleaned out, swept and rearranged, plus started cleaning and putting away stuff that has been out all winter.
Frank

[Gordon Dewald]

Originally Posted by Franka548

Gordon,
He has no beer fridge,but has an under the counter coffee pot that works great.
Plus that grin from ear to ear that he has had since he got here should say it all.
Terry,
Finally got the front compartment cleaned out, swept and rearranged, plus started cleaning and putting away stuff that has been out all winter.
Frank

I keep sodas and iced tea in the "beer" fridge.

Grin - I can believe it but . . . . no pictures . . . . . no happen! lol

Glad everything is going well.

[Harley1994]

Good Morning, Cooler weather today 60's . Frank, it's got to be hard for the first move after all winter in one area. Worked on the dash area yesterday moving some wiring around and installing two new switches, I wanted the same switches that I had in my semis, a flash to pass and a switch to flash the taillights. I also installed the boost gauge in the dash, (still need to get the EGT and trans temp gauges). I also needed to clean and repair the dash cluster, I pulled the face off and cleaned inside the face and glued the cracked trim.

[Franka548]

nice Terry, anything new on the VCM? Yes it is hard to get everything cleaned up and repacked, but it is also nice to see new sites.
Frank

[Harley1994]

Hi Frank, nothing new on VPM yet, I need to get the dash back together and try it just in case it fixed itself, I know it's not likely. There is also another international dealer that I forget about that I want to talk to, a guy I drove for always bought his trucks there, it's smaller and out in the country so may deal with these older rigs more

[rvpopeye]

Terry
Yeah , Rail's new ride sure is a dump !
Wish it was MY dump !

I installed those switches and a tranny guage in my class A , old habits,,,,,,,,

Sending extra karma for the computer trial.....

[Harley1994]

Good Afternoon, Got the dash all back together...........I drove the Tot'r on the same circuit that we did before and NO CODES!! next step, we hook up the TH and take a drive and see what happens . Popeye, maybe it worked!

[Franka548]

Good deal Terry, I hope that it works and that it is running properly. Then you can look for the higher HP CM's at your leisure.
Frank

[rvpopeye]

Dare I hold my breath ???

I think I hear the sound of money,,,,,,,,,,staying in your wallet !

[Harley1994]

Thanks Guys, If it stays with no codes, I will talk with a Co. that will program a power programmer, (Tuner) special for the Tot'r.

[Lloyd in S.C.]

Terry, "May the force be with you!". I hope this works!

L.

[Franka548]

Terry,
Hope that the codes stay away, that would be nice.
Frank