|
|
09-15-2014, 08:28 AM
|
#85
|
Senior Member
Winnebago Owners Club
Join Date: Mar 2014
Posts: 14,885
|
Quote:
Originally Posted by Harley1994
Gordon, very good ideas, I should have thought about the vapor barrier, I will definitely do that. I'm using Poly Iso insulation which is a hard foam like with a backer on both sides, I figured on putting that in everywhere and then using a commercial grade foaming unit to fill any cracks making everything more solid. I have a power vent for the garage, but will have to think about putting in the other in the living area. I did think it would be a good idea to put insulation between the garage and the living area, that way you could leave the ramp down if you wanted to. Thanks!!
|
On our 5er we have two fantastic fans in the living area. One in the bedroom and one in the main living area (near the garage wall). This enabled us to use the fans to cool the trailer. With the winter package we had (nowhere near as good as what you are going to install for insulation) we were able to rarely use the A/C.
In the evening when it was cooling off we would turn the fan in the living room to exhaust and the fan in the bedroom to draw. It would circulate the cooler outside air through the unit. When we went to bed we would turn the fan off in the bedroom and leave the vent open. The living room fan would continue to draw the cooler outside air through the trailer without the noise of the fan running in the bedroom. The living room fan was on a thermostat so it would shut off at the temperature we had selected based on comfort. Both of the fans had rain sensors so we never worried about rain at night.
In hindsight I would put both fans on a thermostat.
In the morning we would shut the fans off and close the blinds etc for the day. We would wait until the inside temp was close to the outside temp before opening any doors or windows. It would normally take until 3 or 4 in the afternoon for the trailer to heat up. We were under shade from about 1 pm.
With the amount and quality of insulation you are installing your unit will outperform the one we had by a substantial margin.
__________________
Gordon and Janet
Tour 42QD/InTech Stacker
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
09-15-2014, 10:38 AM
|
#86
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Nor'easters Club
Join Date: Aug 2014
Location: Upstate New York
Posts: 5,802
|
rebuild
The fan idea is really good its almost what I do in my house, we don't have AC in the house so we had to come up with a way to keep the house cool. I think I will follow your advise on the fans w/therm. Finally starting to put the siding on, had to come up with a way to hold it in place till I could fasten it.
|
|
|
09-15-2014, 01:34 PM
|
#87
|
Senior Member
Winnebago Owners Club
Join Date: Mar 2014
Posts: 14,885
|
Looking good. Looks like the weather is holding.
Applying the siding by yourself is way more difficult than laying the roof.
Had another thought. With the extra height you could put an attic above the garage. If it were accessable and part of the living area a mattress up there would make a place for guests upon occasion. Or a place for extras like riding gear, etc.
__________________
Gordon and Janet
Tour 42QD/InTech Stacker
|
|
|
09-15-2014, 06:45 PM
|
#88
|
Senior Member
Join Date: Jan 2013
Posts: 478
|
Is that smooth aluminum siding? Looks nice!
|
|
|
09-15-2014, 07:52 PM
|
#89
|
Senior Member
Join Date: Jan 2013
Posts: 1,334
|
thank you very much for taking your time and posting all the pix..
the wife i have recently started to rebuild a couple of small vintage tt,s..
we have alot to learn and i am in aww of your rebuild,,,,cant wait to see more pix and read your posts,,,,
thanks for your time and info., we have a total rebuild ahead of us on a 50,s go-tag-along 15ftr..lol but it will be like yours a tear down and total rebuild....--i have actually been converting a 30x50 shed of ours so i can bring it under roof this winter to work on both of our projects..
.we know how much work the small projects can get on just refurbing the i cabin and painting inside an outside..
thanks again for all the pix and info.,,,very helpfull ..and exciting to watch
|
|
|
09-16-2014, 03:56 AM
|
#90
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Nor'easters Club
Join Date: Aug 2014
Location: Upstate New York
Posts: 5,802
|
rebuild
We thought about maybe adding something above the garage, but it would be only approx. 18 " I know in a trailer 18" is alot, but maybe not enough for a bed. I think I might use the space for cupboards, We have to put helmets, gear ect. Yep its smooth 4X8 sheets of .032 aluminum, we plan on using some graphics to break up the white so it won't look like a cargo van going down the road. I am learning as I go as well, and I wish I had a place to put this inside, it would make life alot easier. Good luck on your rebuilds, I'm sure you'll have some fun with them during and after you get'em done by saying I did that!
|
|
|
09-16-2014, 06:42 AM
|
#91
|
Senior Member
Join Date: Jan 2013
Posts: 1,334
|
thanks,,,and yes it is fun and very rewarding when people ask about things that u have made and you tell them that i made that..
i was laughing when you were talking about all the choices about the wall paper and such because that really is one the toughest part s and probably one of the funest....lol
|
|
|
09-16-2014, 08:08 AM
|
#92
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Nor'easters Club
Join Date: Aug 2014
Location: Upstate New York
Posts: 5,802
|
rebuild
Bap, We still haven't really decided on wall covering!! This is a slow day for me here, rained last night and this morn,so the 5'r is covered, looks like it might clear up and be good for 4 days!
|
|
|
09-16-2014, 08:53 AM
|
#93
|
Senior Member
Winnebago Owners Club
Join Date: Mar 2014
Posts: 14,885
|
Quote:
Originally Posted by bap
i was laughing when you were talking about all the choices about the wall paper and such because that really is one the toughest part s and probably one of the funest....lol
|
Easiest and best is what DW decides.
__________________
Gordon and Janet
Tour 42QD/InTech Stacker
|
|
|
09-16-2014, 09:10 AM
|
#94
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Nor'easters Club
Join Date: Aug 2014
Location: Upstate New York
Posts: 5,802
|
rebuild
Gordon, More truer words have'nt been written.
|
|
|
09-16-2014, 09:48 AM
|
#95
|
Senior Member
Texas Boomers Club Fleetwood Owners Club Solo Rvers Club Freightliner Owners Club
Join Date: Jul 2011
Location: Lakin, Ks.
Posts: 3,636
|
Absolutely Fascinating.
I am so impressed.
This is a great thread!!!
Very interesting and learning a lot along the way.....I am anyway.
Keep up the posts and pictures!! Good job!!
__________________
[SIGPIC][/SIGPIC]Kent: 2015 Fleetwood Bounder 35K
With Ferbie (ShihTzu) Lilly (Pekingese) & Daisy (Yorkie) Memoriam: Katie, Spencer, Zoey, Susie, Angie
|
|
|
09-16-2014, 09:51 AM
|
#96
|
Senior Member
Monaco Owners Club
Join Date: Feb 2011
Location: Signal Hill, California
Posts: 3,320
|
WOW just stumbled on to this thread and couldn't stop reading all of your posts and enjoyed your pictures. deSanford
__________________
Sanford, Linda & R cats: Molly, Levi, Cody
2011 Monaco by Navistar RV
Good Sam Life Member Good Sam Hams Chapter
|
|
|
09-16-2014, 10:25 AM
|
#97
|
Senior Member
Join Date: Jan 2013
Posts: 478
|
Another question for ya, are you going to side the whole thing then cut out for windows? What are you using for windows?
|
|
|
09-16-2014, 11:42 AM
|
#98
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Nor'easters Club
Join Date: Aug 2014
Location: Upstate New York
Posts: 5,802
|
rebuild
Thanks again for all the kind words! Travis, the trailer came with, IMO, nice aluminum framed sliders, I'm going to try to polish up the frames and install them, yes, I'm going to side the whole trailer then install the windows, partly because the inside walls have to be installed in order to hold the windows in. To cut the windows/doors there is an aluminum bit for a cut out tool I have, that will make a flush cut right up to the window frame, much like a bit for a router that you would use to finish a counter that you just put a piece of laminate on.
|
|
|
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|