HELP with TV setup

[TXiceman]

If you are on cable, two things to check.

1. Turn off the power amplifier for the antenna. So are wired such that it will bother the cable connection.

2. Next, you will need to Make sure that the TV or the converter box is set for cable and not off-air or antenna.

Then every time you plug into a new cable system, you will need to rescan the TV for the proper channels.

Sorry we never got a chance to check you TV set up.

Ken

[Jurhee]

Hi Ken!
When we tried to get TV on in Boerne, it did not work and Jerry found out that cable was not hooked up at our site!! Anyway, after the office took care of that, it worked--not a great picture, but it worked. I did not check to see if all the channels came in or not.



I think part of our problem is not being able to find the converter box. I had been unable to get the TV to switch from analog to digital. When trying to get it going here in Victoria I have for channels multiple times.

We did not turn it on when we got back to Victoria to check it. I will try it again in a day or two and see what happens.

Thanks!!!

It was a great rally, as usual. So glad to see you guys and have you back in this part of the country.