Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 10-10-2015, 09:13 PM   #1
Senior Member
 
Join Date: Mar 2015
Posts: 143
Changing bulb in "eyeball lamp" 2007 Adventurer

How do you access the bulb in the light fixture that illuminates the control center on this model? I don't want to start prying on things (I did do some test stuff, but don't see any movement).
__________________

__________________
LINADR is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-11-2015, 09:42 AM   #2
Senior Member
 
Starsekr's Avatar
 
Join Date: Feb 2014
Posts: 340
The lens and plastic ring (bezel) around it comes off as one piece. It is held by two molded internal hook type clips, spaced 180 degrees from each other on the bezel. Stand on a stool and use a small knife blade to probe the seam between the bezel assembly and the body, when you locate these hooks, try to press one in to release that side of the bezel. Your replacement lamp is probably one of the 10 watt size lamps (a G4 bi-pin type I think). A 20 watt lamp makes it get pretty hot. There are some 3 watt LED lamps of this type available on eBay. Run cooler and just as much light.
__________________

__________________
Starsekr is offline   Reply With Quote
Old 10-11-2015, 09:26 PM   #3
Senior Member
 
Join Date: Mar 2015
Posts: 143
Thanks for the reply, I mainly want to take it apart to change the bulb to led. Don't want to destroy it in the process..
__________________
LINADR is offline   Reply With Quote
Reply

Tags
vent



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Going to look at a 2007 Monaco Monarch Saturday ie2special Monaco Owner's Forum 0 07-16-2015 07:10 PM
Wandering issue 2007 Winnebago Adventurer 38t Work horse chassis Milom Winnebago Industries Owner's Forum 8 09-03-2014 06:56 AM
2014 Adventurer Drivers Side Wind Noise bz_ny Winnebago Industries Owner's Forum 15 08-13-2014 10:20 PM
2003 Adventurer 35U (Workhorse) Driver Side Turn signal replacement dunkonu23 Winnebago Industries Owner's Forum 10 07-21-2014 05:37 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.