Electric sun visor adjustments

[Dland1937]

Somewhere in this vast reservoir of knowledge I read about adjusting sun visor up & down stops. Can anyone help?

[AFChap]

On most I am aware of, there are two very small depressable "buttons" on one end of the visor. One sets the up stop point, and one sets the bottom stop point ...you have to figure out which is which. The buttons should lock in the despresed position. Depress the button, move it to the desire stop point, then release the button.

[RV Wizard]

Find the button to program the limits. Make certain the shad or screen is fully up and depress and hold the button, you may hear a beep. Run the shade or screen fully down and then fully up. When it reaches the fully retracted position you may hear another beep and the shade or screen is now set.

[Dland1937]

I don't see any buttons on my shades. Do the ends have to be roved first?

[Doug Sage]

Each shade has a small red and a small black roller at the left end (as you face the windshield) with a decal showing + or -. Take a small screw driver and turn the wheel. Then run the shade down and compare with the other shade which should already be down. This way you can tell which way to turn the wheel. I lowered both my blinds this way and it really helped. I'm 5'5" so I really needed it.