Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 12-10-2014, 09:24 AM   #15
Senior Member
 
OLYLEN's Avatar
 
Monaco Owners Club
Join Date: Jan 2008
Location: Olympia, Wa
Posts: 2,332
HAVE you checked to see if the proper fuse amp wise or slow blow is installed?

LEN
__________________

__________________
2004 Clss C 31' Winnebgo
OLYLEN is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-10-2014, 09:03 PM   #16
Junior Member
 
Join Date: Dec 2014
Posts: 5
Worked a couple of hours today. I removed all the bulbs and turned the 4-way flashers on. It worked fine. Put the right front bulb in while flashers were running and it blew the fuse. Took that bulb out. Put one in the left side and it blew the fuse again. Since it was getting dark in the building, I noticed that it had blown but the fuse was glowing. I shut the 4-way switch off, and it lessened but it still was glowing.
__________________

__________________
Don & Gayle in Tennessee
Retread RVer is offline   Reply With Quote
Old 12-12-2014, 07:44 AM   #17
Senior Member
 
mgscott4's Avatar
 
Workhorse Chassis Owner
Join Date: May 2009
Location: Kansas City, MO./Pollock, LA.
Posts: 1,549
Check the wiring going into the fuse box from behind. The the heat may have melted the insulation on a couple of wires and are shorted together.
__________________

__________________
06 Hurricane 34FT WH W20 Chassis 8.1L 132K, Steersafe, Koni Shocks, DIY Trac Bar, Tri-Metric 2025RV Battery Monitor, 4-6V Batteries, Scan Gauge 2, Crossfires, 735W Solar Morningstar MPPT-60, WG T4 In-Motion Sat, XM Radio, 07 Chevy Malibu Maxx Toad, Falcon 2, Brake Buddy, Escapee
mgscott4 is offline   Reply With Quote
Reply

Tags
electrical



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bounder: 2014 Refrigerator problems joegosselin Fleetwood Products Owner's Forum 13 11-21-2014 08:34 AM
Electrical problems bisquit Newmar Owner's Forum 6 11-06-2014 09:33 PM
Electrical problems jimboborino New Member Check-In 7 03-09-2014 10:17 PM
EGR soot cleaning to have less replacement problems tom chelbana Cummins Engines 2 02-14-2014 09:09 PM
2006 SurfSide Electrical Problems rcshaw Class A Motorhome Discussions 8 02-01-2014 09:01 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:06 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.