|
03-15-2018, 06:36 AM
|
#1
|
Senior Member
Join Date: Jun 2008
Posts: 371
|
Engine access panel/flooring
2008 fleetwood Bounder DP, 38f
The MH has a rear bathroom with vanity and half circle shower. It is about 4’ deep. So, in the process of installing floating vinyl flooring in bath.
The free floor space in the bath is almost totally allocated to a engine access panel. This panel allows access to only the top of the engine.
My options........could floor the permenant base, then the access panel,and install edge trim on both areas. OR could just continuously floor the entire area.
My preference is a continuous floor cause it eliminates raised trim pieces on the floor and dirt attracting grooves. Plus with the floating floor removal and reinstall is not a lengthy process.
The question.....how often does this access panel need to be removed? I get the unit serviced every year and never remember it being removed. Not sure if access to the top of the engine is an annual affair.
Expected frequency of removal will greatly influence my decision
Thanks
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-15-2018, 07:30 AM
|
#2
|
Senior Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: May 2016
Location: Kamloops, BC, 60 miles from the Center of the Universe according to the Rinpoche, of the SF monks.
Posts: 7,397
|
Covering it will be flirting with karma. IMHO.
__________________
Happy Glamping, Norman & Elna. 2008 Winnebago Adventurer 38J, W24, dozens of small thirsty ponies. Retired after 40 years wrenching on trucks! 2010 Ford Ranger toad with bicycles or KLR 650 in the back. Easy to spot an RVer, they always walk around with a screwdriver or wrench in one hand!
|
|
|
03-15-2018, 07:44 AM
|
#3
|
Senior Member
Fleetwood Owners Club
Join Date: Jun 2012
Location: Austin, TX
Posts: 879
|
Quote:
Originally Posted by Unplanned
Covering it will be flirting with karma. IMHO.
|
My thoughts exactly, guarantee you will need to access it the week after you cover it up.
|
|
|
03-15-2018, 09:55 AM
|
#4
|
Senior Member
Join Date: Dec 2009
Location: Out there, somewhere
Posts: 9,941
|
Well,
I'd have to agree with the last two answers. Yes, you may not have needed access to that engine all that frequently but, in the event of quick check on it, due to a noise, something's not right, smoke, (emanating from under the coach and sides, not exhaust) etc. or any other reason, I'd want to be able to quickly check if there's a problem. Removing flooring, no matter how simple it might be , would just cause more headache if and when ANYTHING is needed to be checked, serviced etc. I'd not worry too much about the "dirt gathering" edges etc. of the edging around the engine access. That's not a big deal at all. Not that much dirt in a coach anyways. Your coach, your choice.
Scott
__________________
2004 ITASCA HORIZON 36GD, 2011 GMC Sierra 1500 4x4 Toad '20 Honda NC750X DCT
2018 Goldwing Tour DCT Airbag
Retired-29.5 yrs, SDFD, Ham - KI6OND
Me, Karla and the Heidi character, (mini Schnauzer)!
|
|
|
03-15-2018, 10:04 AM
|
#5
|
Senior Member
Monaco Owners Club
Join Date: Aug 2017
Location: Orlando, Florida
Posts: 5,819
|
Quote:
Originally Posted by bandmbrown
installing floating vinyl flooring in bath.
|
I have no experience with this - but others have said on this forum that you should not do a floating floor in a motorhome. There is too much movement during normal driving. You should glue down the flooring - whatever type it is.
When you say "floating vinyl" is this he engineered wood-like product (about 1/4 to 3/8" thick)? I did a floating laminate wood floor in my home so I'm familiar with the "click lock" system. When I think of vinyl I imagine the roll vinyl or squares used in the kitchens of homes for the 70s and 80s (well, still used today).
|
|
|
03-15-2018, 10:09 AM
|
#6
|
Senior Member
Join Date: Aug 2010
Posts: 2,772
|
Your Bounder, if like mine, has a second fuel filter that is most easily accessed through the floor. It should be changed every service.
__________________
Terry & Alice
2006 Bounder 38L DP
2012 GMC Terrain
|
|
|
03-16-2018, 03:10 PM
|
#7
|
Senior Member
Join Date: Jun 2008
Posts: 371
|
Floor
Thanks guys......I’ll .trim it out as suggested
|
|
|
03-17-2018, 03:47 AM
|
#8
|
Senior Member
Join Date: Mar 2017
Location: Zebulon, NC
Posts: 5,211
|
Quote:
Originally Posted by CountryB
I have no experience with this - but others have said on this forum that you should not do a floating floor in a motorhome. There is too much movement during normal driving. You should glue down the flooring - whatever type it is.
When you say "floating vinyl" is this he engineered wood-like product (about 1/4 to 3/8" thick)? I did a floating laminate wood floor in my home so I'm familiar with the "click lock" system. When I think of vinyl I imagine the roll vinyl or squares used in the kitchens of homes for the 70s and 80s (well, still used today).
|
The only flooring I have seen that isn't floating in an RV is ceramic tile.
__________________
Kelly and Jerry Powell with Halo (Lethal White Aussie), Nash the Rat Terrorist, and now Reid, the "Brindle we have no idea puppy"
2020 Grand Design Solitude 390RK-R
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|