|
04-21-2011, 07:23 PM
|
#1
|
Senior Member
Nor'easters Club Fleetwood Owners Club
Join Date: Feb 2011
Location: Massachusetts
Posts: 446
|
How to Swivel Driver and Psgr Seats?
I feel like such a dunce but I cannot figure it out. I cannot seem to find the lever or mechanism to swivle the driver and passenger seats around to face the salon area in our 2005 Fleetwood Revolution.
Any knowledgable people out there that can help me remove this dunce cap from my head?
Thanks in advance.
Faith
__________________
Faith and Bob, Bitsy the Papillon and Bosco the Chi-weenie....RIP Truffles
2005 Revolution LE - 2008 Honda CRV Toad
Northern Massachusetts and the rest of the Country.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-21-2011, 07:35 PM
|
#2
|
Senior Member
Newmar Owners Club Texas Boomers Club Freightliner Owners Club
Join Date: Jul 2008
Location: Don't mess with Texas
Posts: 3,118
|
You should have a lever in the center of the front seat cushion. Just pull it out and rotate the seats.
__________________
Jim with Judy
2017 Newmar Ventana 4369, 2005 Jeep Wrangler (Rock Crawler), 2016 Jeep Wrangler (Mall Crawler)
|
|
|
04-21-2011, 08:00 PM
|
#3
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Feb 2000
Location: San Jose, Ca, USA
Posts: 2,693
|
We have the FlexSteel seats in our 2007 Bounder - on the right-hand side of each seat there are two levers. The front lever adjusts the angle of the seat back and the rear lever actuates the swivel mechanism.
__________________
Alan Hepburn - San Jose, Ca
2007 Bounder 35E being pushed by a 2020 Jeep Gladiator Sport S or a 2022 Jeep Wrangler Unlimited (JLU) Sport S
|
|
|
04-22-2011, 09:00 AM
|
#4
|
Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Jul 2010
Location: Pleasant Valley, NY
Posts: 45
|
In our 2002 Bounder with the FlexSteel seats we have two levers on the left side for swivel and front/back slide and one on the right for tilt.
__________________
2002 Bounder 36U
|
|
|
04-22-2011, 10:07 AM
|
#5
|
Senior Member
Winnebago Owners Club
Join Date: Jun 2010
Location: Iowa
Posts: 1,189
|
As stated above, mine is also on the side and it is another brand of seat. It may help if you look below the upholstery to find the latch and see where it is located on the base. You can then trace the cable to the latch.
__________________
Larry B, Luckiest Dreamer
|
|
|
04-22-2011, 11:27 AM
|
#6
|
Senior Member
Join Date: Aug 2008
Location: Georgia
Posts: 8,638
|
I believe the answer for your chair has been posted. Did you figure out your slide problem, if so post it.
__________________
2007 Fleetwood Revolution LE 40V
|
|
|
04-22-2011, 12:21 PM
|
#7
|
Registered User
Vintage RV Owners Club Gulf Streamers Club
Join Date: Oct 2010
Location: Indiana
Posts: 4,951
|
Or, there could be none...
|
|
|
04-22-2011, 01:21 PM
|
#8
|
Senior Member
Fleetwood Owners Club American Coach Owners Club
Join Date: Mar 2011
Posts: 6,760
|
If you can't solve it, call Fleetwood.
__________________
2014 American Eagle 45T
DD 13, 500 HP
Pulling a Honda CRV
|
|
|
04-22-2011, 03:18 PM
|
#9
|
Senior Member
Damon Owners Club Workhorse Chassis Owner
Join Date: Mar 2009
Posts: 24,024
|
A lot depends on who made the seat, ON my flex steels under the seat (not on the side but down under) on one side, it's the right side for the driver's seat, is a metal rod. No marking of any kind, no plastic or rubber grip, just a rod.. You push back on the rod (toward the rear of the coach) and you may have to wiggle the seat a bit to release the pawl. May be very hard to move.. but it's the only thing down there that looks like a rod which just flat sticks out several inches.
If you look at the "Seat" end of the rod, you will see the latch.
__________________
Home is where I park it!
|
|
|
04-22-2011, 04:42 PM
|
#10
|
Senior Member
Fleetwood Owners Club
Join Date: Dec 2010
Posts: 186
|
On mine with Flexsteel seats it has a recessed handle that needs to be pulled then the seat will swivel.
__________________
2003 Fleetwood Revolution 40'
|
|
|
04-22-2011, 09:23 PM
|
#11
|
Senior Member
Tiffin Owners Club
Join Date: Oct 2005
Location: Full Timing
Posts: 183
|
on our drivers seat the swivel lever is in the right arm rest, on the from of the arm rest, i thought it was to adjust the arm rest up and down but it's to swivel the seat.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|