I have a 2003 Pace Arrow 36R, has an atwood hot water header GC10A-3E. There is no power to the remote switch(on panel inside MH). It works in 120V mode, however, no power to the switch to turn the 12v LP operation. How do i back trace from the switch to the power source? Any Pace Arrow knowledge out there? I did check power to the hot water heater unit itself, however, nothing. I then checked the switch and no power there. Could use some help finding the source.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi ddellavedova,
Welcome to iRV2. I do not know Pace Arrow so this is a shot in the dark. Where the coach 12 VDC fuses are located there should be a fuse labeled "Monitor Panel". Check this fuse.
__________________
Gary
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
No power to water heater on/off switch
Linear Mode
