Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-12-2008, 07:49 PM   #1
Registered User
 
MikeCoke's Avatar
 
Tiffin Owners Club
Join Date: Nov 2005
Posts: 173
I have broken 3 of the 4 anti-sway bar brackets on my P32 since I bought it new 3 years ago.
Does anyone have ant input on the Roadmaster Spreader Bar part #1109-200


Here is what they say:
"The new Roadmaster Suspension Bar installs up over the top of the original equipment sway bar. It uses existing front sway bar bolt holes to hold it in position so it fits the factory bar exactly, yet adds inches on which to anchor new bushings further out.
This Spreader Bar places a new set of bushings out near the outside edge of the sway bar. In this position, the new bushings give the sway bar support it needs so he avoids breaking bolts or brackets on lower control arms."

Has anyone install one & did it help?
Also if I order one with the Part # 1109-200 is it complete with all the bolts, nuts & the 2 new Bushings or do I need to also order them?

Thanks in advance
Mike
__________________

__________________
Mike, Wendy & Gordon our Yellow Lab
2015 Tiffin Allegro 31SA - Toad 1973 Yellow VW Beetle
Retired National Park Ranger
MikeCoke is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-12-2008, 07:49 PM   #2
Registered User
 
MikeCoke's Avatar
 
Tiffin Owners Club
Join Date: Nov 2005
Posts: 173
I have broken 3 of the 4 anti-sway bar brackets on my P32 since I bought it new 3 years ago.
Does anyone have ant input on the Roadmaster Spreader Bar part #1109-200


Here is what they say:
"The new Roadmaster Suspension Bar installs up over the top of the original equipment sway bar. It uses existing front sway bar bolt holes to hold it in position so it fits the factory bar exactly, yet adds inches on which to anchor new bushings further out.
This Spreader Bar places a new set of bushings out near the outside edge of the sway bar. In this position, the new bushings give the sway bar support it needs so he avoids breaking bolts or brackets on lower control arms."

Has anyone install one & did it help?
Also if I order one with the Part # 1109-200 is it complete with all the bolts, nuts & the 2 new Bushings or do I need to also order them?

Thanks in advance
Mike
__________________

__________________
Mike, Wendy & Gordon our Yellow Lab
2015 Tiffin Allegro 31SA - Toad 1973 Yellow VW Beetle
Retired National Park Ranger
MikeCoke is offline   Reply With Quote
Old 03-12-2008, 09:07 PM   #3
Junior Member
 
locoengr's Avatar
 
Workhorse Chassis Owner
Join Date: Nov 2007
Location: Mount Vernon, WA
Posts: 16
I just had this done at Brazel's. It seems to
make a large improvement in handling.

Regards,
Jim
__________________
Jim, Ruth & The Cat

Itasca 27C
locoengr is offline   Reply With Quote
Old 03-17-2008, 08:11 PM   #4
Registered User
 
MikeCoke's Avatar
 
Tiffin Owners Club
Join Date: Nov 2005
Posts: 173
Jim Thanks for thr reply.
Since I will be installing it if I order one I was hoping to get some more info.
I guess I'll have to call a few places to see if they can answer my questions and one I can order it from & have it shipped to me.
SInce you had it instaqlled ny Brazel's I guess I'll call them I had hoped they would reply here.
Mike


<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by locoengr:
I just had this done at Brazel's. It seems to
make a large improvement in handling.

Regards,
Jim </div></BLOCKQUOTE>
__________________
Mike, Wendy & Gordon our Yellow Lab
2015 Tiffin Allegro 31SA - Toad 1973 Yellow VW Beetle
Retired National Park Ranger
MikeCoke is offline   Reply With Quote
Old 03-18-2008, 05:04 PM   #5
Member
 
Bob G's Avatar
 
Join Date: Jan 2002
Posts: 31
Mike,
The installation instructions a on the Roadmaster site at:
http://www.roadmasterinc.com/pdfinst/1109-200.pdf

The picture shows that all the parts are included.
__________________
Bob

2000 Trek 2830 6.5 Diesel
Bob G is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anti-sway bar vs trac bar on W-22? goodiegrabber MH-General Discussions & Problems 4 02-16-2006 06:50 AM
2.5" Anti-Sway Bar? Petro Workhorse and Chevrolet Chassis Motorhome Forum 7 01-16-2006 02:48 PM
Front sway bar outer brackets P32 Jeff H Workhorse and Chevrolet Chassis Motorhome Forum 2 09-30-2005 08:20 AM
Anti-sway bar kenneth adams Workhorse and Chevrolet Chassis Motorhome Forum 3 01-19-2005 04:25 AM
Anti-sway bar vs trac bar on W-22? Workhorse and Chevrolet Chassis Motorhome Forum 4 12-31-1969 07:00 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 09:05 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.