I would suggest you check or add a good ground. Also check connections at both ends of the circuit feeder and any circuit protection devices in the line. Unplug the touch pad for about 5 seconds to reset it. Check voltage at the motor or solenoid under load. You can contact Power gear for help once you have done the above and can give them this info. Good luck and keep us posted.
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7