iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Have 2010 Fleetwood Bounder and the levelers only work in automatic mode- not manual. We sometimes need the manual function.
There's a lot of really good you-tube videos on these levelers.
I was having lots of trouble with mine, NOBODY on the forums knew anything about the Powergear levelers. I watched a bunch of you-tube stuff and figured it out on my own. I also found a really good source for parts and instructions on how to reset things and how to repair them.
Here's what I keep "on hand" for reference.
To get my PowerGear levelers to operate manually, I have to hold the manual button down for 5 seconds. Then a wait light comes on for 20 seconds while the air dumps. When the wait light goes out, I have manual control of front/rear and left/right arrows. There is also a timeout if you don't push any buttons, it shuts off.
Linear Mode
