refrig. LP problems

rapturequick · 10-09-2011, 01:20 PM

My 1995 Winnebago has a Norcold refrigerator which works fine when plugged to 120 or when gen. is running--but doesn't want to light on LP. When lit outside manually it works OK and stays on--but when turned on LP inside; the red X comes on briefly, goes out, then comes on again (after about 11 seconds) and stays on. Since I can lite it outside and it stays on -- does it need a new re-igniter or circuit board or what? Can you help?

TXiceman · 10-09-2011, 01:47 PM

You need to check the controller board and the thermocouple. Also, clean the burner and chimney. If you get a new board, get the one manufactured by Dinosaur and not the OEM board.

ken

DAN L · 10-10-2011, 01:06 AM

Quote:

Originally Posted by talk2mehd

My 1995 Winnebago has a Norcold refrigerator which works fine when plugged to 120 or when gen. is running--but doesn't want to light on LP. When lit outside manually it works OK and stays on--but when turned on LP inside; the red X comes on briefly, goes out, then comes on again (after about 11 seconds) and stays on. Since I can lite it outside and it stays on -- does it need a new re-igniter or circuit board or what? Can you help?

here is some info that may help.

http://bryantrv.com/docs2/docs/600.pdf