Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-27-2011, 08:03 AM   #1
Junior Member
Join Date: May 2011
Posts: 3
replacing floor

Need to replace rug in Gulf Stream. Funiture is built on top of it. How do you attach take problem. Please.

Jbabyboomer is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-27-2011, 08:09 AM   #2
Senior Member
Bob (WA0MQE)'s Avatar
Monaco Owners Club
Join Date: Jun 2003
Location: Between Colorado Springs, CO & Fulton, TX
Posts: 1,511
Blog Entries: 1
You must unbolt the couch/s chair/s, and any items bolted or screwed down through the carpet. Depending on your rig you may need to remove the drivers and passenger seats also. Once this is accomplished any carpet service can remove and replace the carpet.

Bob 2006 Monaco Camelot 40PDQ
US Navy Carrier Battlegroup 1959/1963
Summer in Colorado, Winter Texas Gulf Coast
Bob (WA0MQE) is offline   Reply With Quote
Old 05-27-2011, 10:26 AM   #3
Senior Member
Workhorse Chassis Owner
Join Date: Jun 2003
Location: Palisade CO
Posts: 3,395
In most RVs the carpet is stapled down - with a LOT of staples. I bought a staple puller at a hardware store that helped a lot.

It looks like a flat blade screwdriver with a bent blade that has a V cut in the blade. The ends of the V are sharp so they will slide under the staple and it can be pried up.
Clay WA5NMR - Ex Snowbird - 1 year, Ex Full timer for 11 years - 2004 Winnebago Sightseer 35N Workhorse chassis. Honda Accord toad.
Clay L is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing carpet with laminate floor Chickenman Class A Motorhome Discussions 42 08-12-2011 05:42 AM
replacing the floor rccamper 5th Wheel Discussion 5 05-20-2011 11:24 PM
Replacing floor tiles BudtheDiplomat Class A Motorhome Discussions 1 02-24-2011 05:25 AM
Replacing a floor jurzbill Newmar Owner's Forum 3 12-14-2008 03:57 PM
Floor panel for engine access - can't lift out John_Canfield Winnebago Industries Owner's Forum 9 06-29-2008 04:51 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:12 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.