I have a 1991 30 ft Itasca MH with small holes in the roof. I notice some water in the ceil of the back bedroom and decided to fix it. I removed the 1/8 plywood ceiling and found the foam insultation. There was some water in it so I removed it. Then there was another 1/8 layer of plywood, which I removed to find small holes in the metal roof. I have patched the roof with a liquid sealer I was told to use on my shower when I was making the shower. I am now thinking I should do something to the whole roof. Any ideas of what to use on the top of the roof? I am worried about the piping that goes around the back section of the roof and connects to the ladder. It screws in to the roof and from the bedroom it looks like it just screws through the thin metal roof. I was thinking of putting blocks to screw in to.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Aluminum roof can be repaired with 'peel n seal' aluminum tape available at Lowes. I used it outside and inside. Then coat the roof seams with Ultima available at/through Menards. Then, when it doesnt leak anymore, you can coat the entire thing with an aluminized roof coating.