Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 07-12-2011, 05:41 AM   #1
Senior Member
Pogo's Avatar
Monaco Owners Club
Florida Cooters Club
Join Date: Nov 2010
Location: DeLand, Fl
Posts: 267
Securing Norcold wood cover on freezer

My Norcold freezer door has the nice wood veneer cover and yesterday I noticed that one side of the cover is just a little loose. Inside the door is a white plastic cover. I do not know how to remove it. I want to access the screws that hold the wood cover on so I can retighten them. Has anyone done this before?
Any advice you could offer would be much appreciated.

If at first you don't succeed, skydiving is not for you.
Pogo is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-12-2011, 07:32 AM   #2
Senior Member
Doug Sage's Avatar
Winnebago Owners Club
Workhorse Chassis Owner
Join Date: Mar 2001
Location: Originally from near Portland, OR
Posts: 699
Mine has the stainless steel facing. You take the door off the refrigerator (to make it easier, or leave it on and do it in place) and then there are press on molding pieces along each side of the door. These will peel off easily. This gives you access to the door cover. Mine had some double faced holding the facing in place but I could pull the facing out or realign it. Then I pressed the molding covers back on and was done.
Doug Sage
Full timers roaming the good old US of A
2007 Itasca Suncruiser 38J
2015 Jeep Cherokee Trailhawk
Doug Sage is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cover or Not to Cover? Rocket728 Class A Motorhome Discussions 37 01-08-2011 02:54 PM
This Weeks RV Product Review - To Cover your RV or Not & Winterizing Warpath Vendor Spotlight (Deals, Announcements & More) 1 10-16-2010 05:03 PM
Norcold Freezer problem waterboy Newmar Owner's Forum 2 11-01-2008 05:21 PM
Pains in the Norcold BohseM RV Systems & Appliances 4 07-27-2008 06:08 AM
Norcold Freezer Cooling, Refrigerator Isn't 69RoadRunner Newmar Owner's Forum 18 07-08-2008 05:20 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:39 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.