Slide making noise

[katoommaster]

When closing my slide in the rear on my coach, and it gets to the end (all the way in) it jumps track or makes a pop pop noice if I do not let go of the switch in time. It almost feals like it is jumping in a track or a gear.

Everthing works ok but I know that it should not do this . My front slide goes all the way in and when it is in all the way in I can still hold down the button and there is no problem it just stops


2001 Monico Knight 2 slide

[RV Wizard]

It is probably the clutching of the gear box and is normal operation to prevent from shearing pins or bolts in connecting rods. This will also occur when the room is extended.

[GENECOP]

May need an adjustment, G

[katoommaster]

Is that something I can due?

[GENECOP]

If you look under the slide there is set BOLT, this bolt works as a stop and should be adjusted so it bottoms out when the slide is all the way in, Carefully look under while the slide goes in (watch your head) also there should be marks where the bolts hit the rig body, Gene.