we are having problems with the slide out not going out or in with out pushing it out . It is a 1994 newmar motor home. It makes a noise when trying to get it to move.
Anyone else had this problem or know what to do?
Thanks
Ed and Densie
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
we are having problems with the slide out not going out or in with out pushing it out . It is a 1994 newmar motor home. It makes a noise when trying to get it to move.
Anyone else had this problem or know what to do?
Thanks
Ed and Densie
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
Ed check and see if your rail with holes is receiving the pins from wheel off drive shaft correctly. Also take a look at your rollers under slide floor and make sure non are loose, cracked or detatched from floor deck.
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
Ed, if the pins on drive wheel is the problem there are two allen pins both sides of drive wheel that can be loosend and aline the pins in holes. May need help to push slide into side wall or out as the case may be.