Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 07-18-2010, 10:46 AM   #1
Senior Member
Workhorse Chassis Owner
Join Date: Apr 2005
Location: Spanish Springs, NV, USA
Posts: 268
Slide Wall Issue

Our outside bedroom slide wall has a problem at the lower front corner. (see picture). Some of the screws on the bottom behind the facia? have snapped off and the corner bracket/trim is cracked and broken. That bottom facia/trim appears to be slipping downward.
I don't know where to start with this.
Attached Images

2006 Dolphin LX 6320 W22 34 FT.
Jeff H is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-19-2010, 06:53 AM   #2
Senior Member
RJay's Avatar
Newmar Owners Club
Join Date: Jan 2010
Posts: 4,589
It's hard to tell from the pictures but it looks like the bottom support bracket has cracked causing the wall to sag. I would try to jack the floor back to where it should be and remove the bracket and replace it with something larger/thicker keeping in mind that it can't interfere with the slide closing. You might even be able to add an angle bracket over the cracked one, welding it at the corners, and extending it up the sides for support.
2007 Newmar DSDP 4023
Discovery is seeing what everyone else has seen and thinking what no one else has thought.
If you want to see what man made go East; if you want to see what God made go West.
RJay is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sticky slide & bent flange GoneFishin Monaco Owner's Forum 9 04-22-2010 01:32 AM
Any comments on full wall slide 42C Eagle? JohnCamelot Fleetwood Products Owner's Forum 11 12-23-2009 03:42 PM
Dinette pulled out from slide wall WSRG National RV Owner's Forum 4 10-25-2009 10:52 PM
Slide Issue AdrianLee Winnebago Industries Owner's Forum 16 03-22-2006 12:06 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:28 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.