Community Forums

scooterbob · 11-04-2019, 02:30 PM

I need to rebuild the water valve on my thereford Toilet, any ideas where to purchase a kit and instructions ?

Rocky Larson · 11-04-2019, 02:52 PM

https://www.amazon.com/s?k=thetford+...l_3xfu788z0q_e

As good a place as any....

scooterbob · 11-04-2019, 07:28 PM

My problem is I cannot find any model numbers

windsorbill · 11-04-2019, 08:47 PM

Plastic or porcelain? Post a picture of it here and someone will recognize it. Many of the parts are interchangeable between model's.

Old-Biscuit · 11-04-2019, 09:25 PM

IS this your toilet......Aqua Magic Style II ?

Item #9 is the water valve...goggle search the part number.
Should come with instructions
https://www.thetford.com/part/aqua-magic-style-ii/

scooterbob · 11-05-2019, 04:03 AM

Yes it is, thank you..

txcpl · 11-05-2019, 06:15 AM

Your toilet may have 3 different kits needed to make a complete repair job.
A flush ball seal for inside the bowl, a flush valve, and a vacuum breaker. When you have the toilet off it's base, might as well replace all 3 so you don't have to repeat the process anytime soon. ( I may not have used the correct terms for these 3 kits)
Not a hard job. Took me about 1 hour, start to finish.
God luck.

153stars · 11-05-2019, 07:43 AM

Not the same model as my old TT had. I found an assemble that replaced pretty much all the guts. A lot of the fasteners and rods that were pretty far gone . swelled with rust starting to distort plastic, seals all going bad. Would of made it a pain in butt to rebuild. I think I found it on eBay relatively cheap, Amazon wasn't huge back then.