 |
08-20-2016, 11:11 AM
|
#1
|
|
Member
Join Date: Aug 2016
Posts: 87
|
TV no signal no channels after...
Hello all. New to us Damon 02 Intruder. We've only had it a few days first weekend out. Last night TV worked fine was able to scan for channels and picked up several antenna booster was on and antenna was up. Someone next to us what setting up and they turned off our 50 amp breaker and flipped it back on again realizing they hit the wrong one. Now TV still comes on and booster is on the TV can't find any channels and gives me no signal notice. Anyone have any thoughts thank you
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
08-20-2016, 11:20 AM
|
#2
|
|
Senior Member
Join Date: Dec 2013
Location: Plantation, Fl
Posts: 1,884
|
I'm not sure from your post,whether you tried scanning for channels again, or not. If you haven't, I suggest you try doing that.
__________________
2024 Jayco Redhawk 26 M (OCCC challenged)
2017 RWD F 150 with a drive shaft disconnect
|
|
|
|
|
08-20-2016, 11:20 AM
|
#3
|
|
Moderator Emeritus
Damon Owners Club Workhorse Chassis Owner
Join Date: Mar 2012
Location: Lone Star State
Posts: 19,203
|
Power off causes some TV's to dump all settings (goes to factory default).
Ensure the TV input on the menu is selected to antenna (not cable) and search again.
The rooftop antenna booster is 12volt, so should have not been impacted by the neighbor.
Best luck
|
|
|
|
|
08-20-2016, 12:27 PM
|
#4
|
|
Member
Join Date: Aug 2016
Posts: 87
|
I did do a rescan after and nothing. Tried several actually.
|
|
|
|
|
08-20-2016, 12:37 PM
|
#5
|
|
Senior Member
Join Date: Aug 2013
Location: Upstate New York
Posts: 354
|
As said check the tv input and make sure it is on antenna.
__________________
George & Jerri
06 GT 340TSSE
USMC VET.
|
|
|
|
|
08-20-2016, 03:04 PM
|
#6
|
|
Member
Join Date: Aug 2016
Posts: 87
|
It is. I've gone over all the settings now. Checked cables inside but have not done so out side yet, can do that when I get home.
It's odd that it worked perfect Friday night. Camper next to us when to plug in, turned my 50amp breaker OFF, then back on again. Lost the ability to pick up channels ever since. We were watching TV when it happened!
|
|
|
|
|
08-20-2016, 03:16 PM
|
#7
|
|
Senior Member
Monaco Owners Club
Join Date: Jun 2014
Posts: 14,591
|
Are you sure your booster is on??
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|
|
|
|
|
08-20-2016, 05:45 PM
|
#8
|
|
Senior Member
National RV Owners Club Ford Super Duty Owner
Join Date: Sep 2014
Location: Georgia
Posts: 588
|
Unplug the electric plug from the outlet for about 10 minutes or more. The tv should reset itself to factory specs.
__________________
Jerry and Barbara,
2005 Nat Sea Breeze 1321
2010 Honda CR-V toad
|
|
|
|
|
08-20-2016, 06:13 PM
|
#9
|
|
Member
Join Date: Aug 2016
Posts: 87
|
Trying that now.. thanks
|
|
|
|
|
08-20-2016, 06:27 PM
|
#10
|
|
Member
Join Date: Aug 2016
Posts: 87
|
Well that was a no go.. Will have to wait till we get home tomorrow or Monday and mess with it better. Will post as to what caused if I find out.
Thanks all!
|
|
|
|
|
09-16-2016, 04:58 PM
|
#11
|
|
Member
Join Date: Aug 2016
Posts: 87
|
To give this topic closure I found the issue. Ant. In was not the antenna but the SAT.
|
|
|
|
|
09-17-2016, 07:00 PM
|
#12
|
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,676
|
Yeah, if your antenna signal is routed through the satellite receiver, that'll do it!
Thanks for the feedback.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
