Weldex camera stopped working in my Bounder

[Dan_Lorenze]

So, I've owned my 4 Bounder for about a month and my Weldex camera worked fine for a couple of weeks. Just last week the picture became intermittent, it would come and go and now it's totally gone. The monitor seems to be fine with a solid green status light yet there's no picture anymore... Since my dash bounces up and down from time to time on bad roads I'm thinking that maybe a connector came loose from the back of the monitor... Any thoughts? How hard would it be to pull the dash out?

Thanks

[Dan_Lorenze]

So, I've owned my 4 Bounder for about a month and my Weldex camera worked fine for a couple of weeks. Just last week the picture became intermittent, it would come and go and now it's totally gone. The monitor seems to be fine with a solid green status light yet there's no picture anymore... Since my dash bounces up and down from time to time on bad roads I'm thinking that maybe a connector came loose from the back of the monitor... Any thoughts? How hard would it be to pull the dash out?

Thanks

[BB501]

Dan,
I had the identical problem and wound up pulling the IP to get at the back of the Weldex. All I did was push the connector plug in tighter and all was back to normal. The down side was getting at it since it's dash mounted and during the process I cracked my dash panel cover. Hope your solution goes better.

Steve

[Dan_Lorenze]

Thanks for the info Steve! I think I'll just pull off the front panel off the dash the check it out, I need to pull it off to upgrade the stereo anyway..

Dan