Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-15-2011, 11:00 AM   #1
Senior Member
Join Date: Dec 2010
Posts: 353
wiper arm rubber boot

looking for the proper nomenclature for the rubber boot that fits just under the wiper arm.......approx 1 1/4 inch in diameter and about an inch high w/a hole in the center to fit on the wiper motor shaft.

I have tried several rv parts places for replacments...no luck....does anyone have a connection?


corjaguar is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-15-2011, 03:17 PM   #2
Senior Member
paz's Avatar
Join Date: May 2005
Location: Full-timers - Home is where we park it.
Posts: 4,431
Try NAPA. They have replacement rubber dust boots for tie rod ends in several sizes. Maybe one of those would work. If you can't find them in the store, ask - they may be behind the counter.

2015 DRV Tradition 375KPS
2015 Chevy Duramax 3500HD LTZ Dually
Full-timers...Home is where we park it.
Check out our blog: Living Our Dream
paz is offline   Reply With Quote
Old 05-15-2011, 04:15 PM   #3
burmashave's Avatar
Join Date: Apr 2011
Posts: 71
how about fabricating a boot out of some heat shrink material. oversize it and wrap it around. heat it until it's sealed but still has wiggle room. the stuff is cheap. you can play with it until you get what you want. comes in many different colors.
burmashave is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Windshield Wiper Arm Slipping Saber77 Monaco Owner's Forum 11 06-29-2011 07:18 PM
1999 Intrigue wiper arm question stkhlm Country Coach Owners Forum 1 02-19-2011 11:59 AM
windshield wiper arm removal tqracn MH-General Discussions & Problems 2 09-05-2010 10:02 AM
Windshield wiper arm replacement Jim & Ingrid McIntosh Alpine Coach Owner's Forum 11 09-27-2009 02:39 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:10 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.