 |
2008 Jeep Wrangler Unlimited auto tranny
01-13-2012, 10:08 AM
|
#1
|
|
Senior Member
Appalachian Campers
Join Date: Sep 2002
Location: Dixie !! (north Georgia) USA
Posts: 1,733
|
Is there some sort of wiring system that I can simply snap intowiring harness on the Jeep to work brake lights, turn signals and tail lights from the wiring on my MH? Something similar to the things we snap into the wiring to add the pigtail for towing a trailer, but can be added to the wiring up front of the Jeep.
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
01-13-2012, 10:13 AM
|
#2
|
|
Senior Member
Join Date: Oct 2008
Location: Carson City, NV
Posts: 450
|
__________________
Bob & Sherron
2009 Tiffin Phaeton 40QSH
2011 Jeep Wrangler Sahara O|||||O
|
|
|
|
| |
|
|
01-13-2012, 11:32 AM
|
#3
|
|
Member
Nor'easters Club Winnebago Owners Club Freightliner Owners Club
Join Date: Feb 2009
Posts: 93
|
Cool tec x2
__________________
2010 Winnebago Tour
08 Jeep Wrangler
04 Chevrolet SSR
|
|
|
|
| |
|
|
01-14-2012, 08:50 AM
|
#4
|
|
Senior Member
Appalachian Campers
Join Date: Sep 2002
Location: Dixie !! (north Georgia) USA
Posts: 1,733
|
Looks like Cool Tec is the answer!! Thanks.
Do I need anything like diodes to protect the computer system? or are these built in?
__________________
|
|
|
|
| |
|
|
01-14-2012, 09:10 AM
|
#5
|
|
Senior Member
Workhorse Chassis Owner
Join Date: Aug 2010
Posts: 130
|
had our Wrangler wired up with the Blue Ox harness-has the diode packs...works seamlessly
__________________
2005 Itasca Sunrise 38J W24 Workhorse
2011 Chevy Silverado 1500 Crew Cab LT
2009 Jeep Wrangler Sahara/U.S. Navy 1978-1986
|
|
|
|
| |
|
|
01-14-2012, 04:59 PM
|
#6
|
|
Senior Member
Ford Super Duty Owner
Join Date: May 2009
Location: kingston tn.
Posts: 677
|
i made my own with a couple of sockets from autozone and drill a 15/16 hole
in the tail light assembly wire them up per standard trailer diagram to a 4 pin connector
you are ready to go totally isolated from the jeep,
total cost less than 25 bux
brian
__________________
just liven life in east tn or where ever our
2011 georgetown ve 280 w/full paint
2011 wrangler 4dr mangotango toad take us
|
|
|
|
| |
|
|
01-17-2012, 05:19 PM
|
#7
|
|
Senior Member
Join Date: Jan 2011
Location: Debary Fl
Posts: 355
|
Quote:
Originally Posted by tncruiser
i made my own with a couple of sockets from autozone and drill a 15/16 hole
in the tail light assembly wire them up per standard trailer diagram to a 4 pin connector
you are ready to go totally isolated from the jeep,
total cost less than 25 bux
brian
|
Tncruiser, what was the part number of the sockets you used? Want to set my 2012 up the same way.
__________________
Bruce and Linda, Debary, Fl
1999 ForeTravel U295
012 orange Jeep Wrangler
|
|
|
|
| |
|
|
01-17-2012, 05:27 PM
|
#8
|
|
Senior Member
Newmar Owners Club
Join Date: Oct 2009
Posts: 237
|
Quote:
Originally Posted by doc
looks like cool tec is the answer!! Thanks.
Do i need anything like diodes to protect the computer system? Or are these built in?
|
i just installed the cool tech harness on a new 2011 wrangler sahara and it is just plug and play. Easy install
IF YOU NEED A BASE PLATE CHECK THIS OUT http://www.currieenterprises.com/ces...t.aspx?id=2791
I JUST INSTALLED ONE OF THE CURRY PLATES ALSO AND IT FIT LIKE A GLOVE AND LOOKS LIKE A SKID PLATE WHEN NOT TOWING
__________________
 2000 MADP 4060 MOUNTAIN AIRE
350 HP ISC, 2011 WRANGLER SAHARA ,2006 ULTRA CLASSIC
|
|
|
|
| |
|
|
01-18-2012, 05:20 AM
|
#9
|
|
Senior Member
Ford Super Duty Owner
Join Date: May 2009
Location: kingston tn.
Posts: 677
|
Quote:
Originally Posted by bbeane
Tncruiser, what was the part number of the sockets you used? Want to set my 2012 up the same way.
|
I dont know te part # but they are just replacement sockets for 1157 bulbs,if I get a chance i will get to autozone and find out.I like the set up because it is its own system and in no way connects to the jeeps electrical system
brianj
__________________
just liven life in east tn or where ever our
2011 georgetown ve 280 w/full paint
2011 wrangler 4dr mangotango toad take us
|
|
|
|
| |
|
|
01-18-2012, 09:19 AM
|
#10
|
|
Senior Member
Join Date: Oct 2008
Location: Carson City, NV
Posts: 450
|
Quote:
Originally Posted by bbeane
Tncruiser, what was the part number of the sockets you used? Want to set my 2012 up the same way.
|
While it does cost more than $25, the Blue Ox complete light kit is available here for $56 with free shipping: Amazon.com: Blue Ox BX8869 Bulb and Socket Tail Light Wiring Kit: Automotive
__________________
Bob & Sherron
2009 Tiffin Phaeton 40QSH
2011 Jeep Wrangler Sahara O|||||O
|
|
|
|
| |
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
»
Recent Discussions
»
Upcoming Rallies
No events scheduled in
the next 365 days.
|
»
iRV2 on facebook
|
Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 07:18 PM.
Chevy Camaro Forum
Ford Mustang Forum
Jeep Wrangler Forum
Volkswagen Touareg Forum
Land Rover Defender Forum
