2010 Honda CRV Which wire for brake monitor led

[ctcamper]

Does anyone know which wire to splice into off the brake pedal switch for the monitor led going to the motorhome ?
I can't find a wiring diagram for the honda and before I start testing the plug was just wondering if anyone had the wire color?

[ctcamper]

I have a seperate harness set up for turn and brake with led lamps.. I was thinking I could probably tap the existing factory lamp in the rear for the monitor without having to splice into the factory harness at the pedal.
What do you think?

[adj]

If you go to Helms.com, you should be able to order a service manual. That's where I get my manuals.

With regard to LEDs, you might need to reduce the input voltage. I'm not really up-to-snuff on that.

[ctcamper]

Roadmaster 9700 brake. I'm using the led that came with the brake unit... I know they suggest using the brake switch area but I was thinking it might be better to connect the wire at the rear lens where the lead goes into the factory bulb for the motorhome monitor led...or maybe I can get it in the plug at the brake pedal... I hate to splice into the wiring if I don't have to , but I would like to have the monitor to show when the pedal is depressed.

[ctcamper]

I hooked it into the wire where it comes out of the disconnect going to the brakelight assembly ... behind the drivers side rear quarter panel moulding.