I assume that the brake relay switch needs to be installed on my 2014 Ford Edge since I will be using my Patriot auxiliary brake system which manually applies the brake. I have searched and found that the Edge needs to be wired as an normally open confiquration but can not find any videos or info on how to wire the relay. There are about 6 wires coming out of the original brake switch. Can someone steer me in the right direction with this. I am usually pretty good at this stuff but just do not have the confidence to start cutting wires before I am sure of what im doing and what color wires go where. Thanks for anyones advice. bk
Bill & Jeanne Kaufman
04' Fleetwood Bounder / 2014 Ford Edge TOAD
32W Workhorse Chassis 8.1 Vortec.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
On many Ford product the brake wire is Purple/White. Check with meter before cutting.
04 Horizon QD, 12 Ford Flex, Excalibar, Brake-Pro, ,, Winter Texan, RVin! since 1974
Norm, Donna & Tinker Kat 74 MGB-GT, 75 MGB, 01 Z3
Life is a Timed Event, you only get One Go Around!