The manual calls for three fuses to be removed. Under hood #21 Main backup. Under dash ACC Power Socket and ACC fuses.
Question: If I pull the ACC Socket fuse then how do I get power to the EVEN Brake system doing towing?
If I do not pull the ACC Socket is there other components wired to it?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I'm sure the instructions on my 2012 Fit say to pull fuses but instead, I added a ToadCharger system (LSL Products and RVi both make them). The ToadCharger and similar units take the 12V from the coach and keep the battery charged. No fuses need to be removed.
__________________
Roger & Mary
2017 Winnebago Navion 24V (Sold)
2014 Tiffin Phaeton 36GH (Sold)
i thought 2015 fit uses cvt tranny, which can't be dinghy towed. looks like i was wrong...
mine is a 2010's. i connected a charge line, and i don't pull anything.
__________________
Steven & Polly
2000 Country Coach Intrigue 40' ISC 350
2018 Ford Explorer 4WD