iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I'm not sure what you're asking for. The Brake Buddy's 'handle' adjusts up or down to align with the seat front for the BB to brace against. Is there something special about your car's seat that it doesn't fit?
Bob & Donna
'98 Gulf Stream Sun Voyager DP being pushed by a '00 Beetle TDI
If your seat does not go far enough forward make a spacer out of wood or whatever that will withstand some compression. Adjust the handle up or down to something solid on the seat/spacer. Take all the vacuum out of the car's brake system. Push the set button several times to insure the brake buddy pushes the pedal.
2015 Fleetwood Discovery 40E on a Freightliner XCS chassis with a Cummins ISL9 pulling 1 and/or 2 motorcycles, '07 Honda Accord OR a 17' Runabout Boat.
our jeep wrangler seat has a thin frontal area, but I did just what was suggested, adjusted the handle so that it hits right in the middle of seat and it works fine...
Download your instruction manual here so you can print out a copy and/or condense it onto one page like I did...
If you really are sad and think nobody cares, just try missing a few payments ! '11 Monaco Diplomat 43DFT RR10R pushed by a Demco Excali-Bar II hitch which is pushed by a '14 Jeep Wrangler Unlimited Sport.